PTC094K35AXXX - Air Conditioning AMANA - Free user manual and instructions
Find the device manual for free PTC094K35AXXX AMANA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Packaged Terminal Air Conditioner (PTAC) |
| Brand | Amana |
| Model | PTC094K35AXXX |
| Cooling Capacity | 9,000 BTU/h |
| Heating Capacity | Electric heat: 3.4 kW (approx. 11,600 BTU/h) |
| Voltage | 208/230 V, 60 Hz, 1 Phase |
| Current Draw | 12.5 A (cooling), 14.5 A (heating) |
| Power Cord | NEMA 6-20P plug, 4 ft cord |
| Dimensions (W x H x D) | 26 x 16 x 22 inches |
| Net Weight | 110 lbs |
| Refrigerant | R-410A |
| Airflow (High/Low) | 300/250 CFM |
| Energy Efficiency Ratio (EER) | 9.5 |
| Control Type | Digital thermostat with remote control |
| Modes | Cool, Heat, Fan Only, Auto |
| Fan Speeds | High, Low, Auto |
| Filter Type | Washable mesh filter |
| Filter Cleaning | Every 30 days under normal use |
| Drainage | Self-evaporating (no drain pan required in dry climates); condensate drain kit optional |
| Safety Features | Overload protection, thermal cut-off, auto restart after power failure |
| Installation | Through-wall sleeve required (sold separately); includes outdoor grille |
| Warranty | 1 year limited parts and labor, 5 years on sealed system |
| Repairability | User-replaceable: filter; technician-required: compressor, fan motor, control board |
Frequently Asked Questions - PTC094K35AXXX AMANA
How do I clean the filter on my Amana PTC094K35AXXX?
Turn off the unit, open the front grille, slide out the filter. Wash with mild detergent and water, dry completely, then reinstall. Clean every 30 days for optimal performance.
The remote control is not working. What should I check?
Ensure batteries are fresh and inserted correctly. Point remote directly at the unit's receiver. Check for obstructions. If still not working, try resetting the unit by unplugging for 30 seconds.
Why is my air conditioner not cooling properly?
First, check if the filter is dirty. Clean it. Ensure the thermostat is set below room temperature. Verify that the condenser coils (outdoor side) are not blocked. If problem persists, the unit may need refrigerant recharge by a technician.
What does the 'Error Code E1' mean?
Error E1 indicates a communication failure between the control board and the compressor. Try power cycling the unit. If error reappears, contact a qualified service technician.
Can I install this PTAC unit myself?
Installation requires a wall sleeve, proper electrical wiring (208/230V outlet), and sealing. It is recommended to hire a professional to ensure safe and correct installation.
How often should I service my Amana air conditioner?
Clean the filter monthly. Have a professional inspect the unit annually, including coils, fan motor, and electrical connections.
The unit is making a loud noise. What could be the cause?
Common causes: loose screws, obstructed fan blade, or worn bearings. Check for debris around the fan. If noise persists, the motor may need replacement.
Does this model have a heat pump or electric heat?
This model uses electric resistance heating, not a heat pump. It can provide both cooling and heating.
What is the recommended thermostat setting for cooling?
For energy efficiency, set the thermostat to 78°F (26°C) when cooling. Use the 'Auto' fan mode to save energy.
Where can I find the serial number?
The serial number label is located on the side of the unit chassis, behind the front grille, or on the rating plate visible when the front panel is removed.
User questions about PTC094K35AXXX AMANA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual PTC094K35AXXX - AMANA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PTC094K35AXXX by AMANA.