P1290-E - Security Camera AXIS - Free user manual and instructions
Find the device manual for free P1290-E AXIS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Camera |
| Brand | AXIS |
| Model | P1290-E |
| Video Resolution | Up to 1920x1080 (Full HD) |
| Frame Rate | Up to 30 fps |
| Day/Night Function | Yes, with IR-cut filter |
| Infrared Distance | Up to 20 meters |
| Lens Type | Fixed focal, 2.8 mm |
| Field of View | Horizontal: 90°, Vertical: 50° |
| Power Source | Power over Ethernet (PoE) IEEE 802.3af |
| Power Consumption | Max 4.5 W |
| Dimensions (W x H x D) | 100 x 75 x 50 mm |
| Weight | Approximately 300 g |
| Housing Material | Aluminum and polycarbonate |
| Weather Rating | IP66 (indoor/outdoor) |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -40°C to 65°C |
| Video Compression | H.264, MJPEG |
| Audio Support | Two-way audio (external mic/speaker) |
| Network Port | 10/100 Base-T Ethernet RJ-45 |
| Security Protocols | HTTPS, SSL/TLS, IP filtering |
| Mounting Type | Wall or ceiling mount (bracket included) |
| Included Accessories | Mounting bracket, screws, quick start guide |
| Warranty | 3 years limited warranty |
| Cleaning Instructions | Clean with a soft, dry cloth. Avoid solvents. |
Frequently Asked Questions - P1290-E AXIS
How do I install the AXIS P1290-E camera?
Mount the camera using the included bracket. Connect the Ethernet cable for power and network. Use the AXIS IP Utility tool to find the camera on your network and assign an IP address.
Does the camera support night vision?
Yes, the AXIS P1290-E has built-in infrared LEDs with a range of up to 20 meters. The IR-cut filter automatically switches for day/night mode.
Can I access the camera remotely?
Yes, enable remote access via the camera's web interface. Use HTTPS for secure connections and configure port forwarding on your router if needed.
What is the field of view?
The camera has a fixed 2.8 mm lens providing a horizontal field of view of 90° and vertical of 50°.
How do I reset the camera to factory defaults?
Press and hold the reset button (located on the camera) for 10 seconds while the camera is powered on. The camera will restart with default settings.
Is the camera weatherproof?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against strong water jets. Suitable for outdoor use.
What power supply is required?
The camera supports Power over Ethernet (PoE) IEEE 802.3af. Use a PoE switch or a PoE injector. No separate power adapter is needed.
How do I update the firmware?
Download the latest firmware from the AXIS website. Log into the camera's web interface, go to Maintenance > Upgrade, and upload the file. Do not power off during update.
Can I record video locally?
Yes, the camera supports recording to a NAS or via AXIS Camera Station. It does not have an onboard SD card slot.
What should I do if the camera is not detected on the network?
Ensure the Ethernet cable is connected and the PoE switch is active. Use the AXIS IP Utility to scan for devices. If still not found, try a factory reset.
User questions about P1290-E AXIS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual P1290-E - AXIS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P1290-E by AXIS.
USER MANUAL P1290-E AXIS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXIS
Model : P1290-E
Category : Security Camera