DPDM-16-15-PA - Uncategorized Festo - Free user manual and instructions
Find the device manual for free DPDM-16-15-PA Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Festo |
| Model | DPDM-16-15-PA |
| Type of Product | Pneumatic Cylinder, Double-Acting |
| Bore Diameter | 16 mm |
| Stroke Length | 15 mm |
| Piston Rod Thread | M6 |
| Operating Pressure Range | 1...10 bar |
| Ambient Temperature Range | -20...80 °C |
| Cushioning Type | Elastic cushioning rings |
| Weight | Approx. 0.05 kg |
| Materials | Aluminum (barrel, end caps), Steel (piston rod) |
| Main Functions | Linear motion for pushing, pulling; double-acting |
| Mounting Options | Foot mount, flange mount, or via end cap holes |
| Maximum Lateral Force | 100 N max. (recommended 30 N for long life) |
| Port Size | M5 female thread |
| Fluid Compatibility | Compressed air, filtered and optionally lubricated |
| Maintenance | Periodic cleaning and inspection; replace seals if worn |
| Safety Precautions | Do not exceed maximum pressure; secure against unintended movement |
| Spare Parts Availability | Seal kits, piston rod assemblies, cushioning rings |
| Repairability | Repairable by replacing seals and worn components |
| Certifications | CE, RoHS (typical for Festo) |
Frequently Asked Questions - DPDM-16-15-PA Festo
How do I mount the Festo DPDM-16-15-PA cylinder?
The cylinder can be mounted using foot mounts, flange mounts, or bolts through the end cap holes. Ensure the mounting surface is flat and use the appropriate hardware. Refer to the mounting dimensions in the manual.
What is the maximum operating pressure for this cylinder?
The maximum operating pressure is 10 bar. The recommended working pressure range is 1 to 10 bar. Exceeding this can cause damage or failure.
Can I use non-lubricated compressed air with this cylinder?
Yes, the DPDM-16-15-PA is designed to run on filtered, non-lubricated compressed air. However, using lightly lubricated air (e.g., with Festo special oils) can extend seal life.
How do I replace the seals on the DPDM-16-15-PA?
Disconnect air supply, remove the cylinder from mounting, then disassemble the end caps. Remove the old seals and piston rod. Replace with genuine Festo seal kit (order number available in the manual). Reassemble in reverse order, ensuring proper orientation of seals.
What is the stroke length tolerance?
The nominal stroke length is 15 mm. The effective stroke may vary by about 0.5 mm due to cushioning. For precise positioning, consider using position sensors.
Is the cylinder magnetic for use with proximity sensors?
The standard DPDM-16-15-PA does not include a magnetic piston. For position sensing, use the variant with magnetic piston or add an external magnet. Check the part number: 'PA' typically indicates plain piston rod (non-magnetic).
What is the temperature range for the cylinder?
The ambient temperature range is -20 to 80 °C for standard seals. For higher or lower temperatures, special seal materials (e.g., FKM) are required.
What type of fittings connect to the cylinder ports?
The ports are M5 female threads. Compatible fittings include push-in connectors with M5 threads (e.g., Festo QS series) or standard banjo fittings. Use sealing tape on the threads.
How to troubleshoot if the cylinder does not move?
Check supply pressure (min. 1 bar), ensure air supply is connected, listen for leaks, and verify that the load is not excessive (< 100 N lateral, < stroke force limit). Also check if cushioning is too tight.
What spare parts are available for the DPDM-16-15-PA?
Common spare parts include seal kits (piston seal, rod seal, cushioning rings), piston rod assembly, and end cap gaskets. Order using Festo part numbers from the manual.
User questions about DPDM-16-15-PA Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DPDM-16-15-PA - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DPDM-16-15-PA by Festo.
USER MANUAL DPDM-16-15-PA Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DPDM-16-15-PA
Category : Uncategorized