EAHT-E9-FB-3D-30 - Uncategorized Festo - Free user manual and instructions
Find the device manual for free EAHT-E9-FB-3D-30 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Parallel Gripper |
| Brand | Festo |
| Model | EAHT-E9-FB-3D-30 |
| Dimensions (L x W x H) | 100 mm x 50 mm x 30 mm |
| Weight | 0.5 kg |
| Operating Pressure | 4 to 8 bar |
| Medium | Compressed air (filtered, unlubricated) |
| Stroke per Jaw | 8 mm |
| Gripping Force | 30 N at 6 bar |
| Repeat Accuracy | ±0.02 mm |
| Ambient Temperature | 0 °C to 60 °C |
| Mounting Position | Any |
| Pneumatic Connection | M5 thread |
| Material | Aluminum alloy, hardened steel jaws |
| Protection Class | IP40 |
| Maintenance | Wipe with dry cloth; check seals periodically |
| Safety Precautions | Do not exceed max pressure; keep fingers clear of moving jaws |
| Spare Parts Available | Seals, gripper jaws, mounting kit |
| Repairability | Modular design; components replaceable |
Frequently Asked Questions - EAHT-E9-FB-3D-30 Festo
What is the operating pressure range for the Festo EAHT-E9-FB-3D-30?
The recommended operating pressure is between 4 and 8 bar. Exceeding 8 bar may cause damage.
How do I mount the gripper?
The gripper can be mounted in any orientation using the threaded holes on the body. Refer to the mounting diagram for screw specifications.
What is the gripping force at 6 bar?
At 6 bar, each jaw exerts approximately 30 N of gripping force. Actual force depends on jaw geometry.
Can I use lubricated air?
Unlubricated filtered air is preferred. If lubricated, use ISO VG 32 oil and ensure consistent lubrication.
How often should I replace seals?
Seal life depends on cycle count and environment. Inspect annually; replace if leakage or wear is observed.
What is the maximum stroke per jaw?
The maximum stroke per jaw is 8 mm. Do not attempt to exceed this limit.
Is the gripper suitable for cleanroom use?
This model has IP40 protection and is not certified for cleanroom. For cleanroom variants, consult Festo.
What happens if pressure drops below 4 bar?
Below 4 bar, the gripping force may be insufficient to hold objects, and the gripper may not fully close.
Can I replace the jaws?
Yes, the jaws are replaceable. Order genuine Festo spare jaws for the EAHT series.
What is the repeat accuracy?
The repeat accuracy is ±0.02 mm, ensuring reliable positioning for repetitive pick-and-place tasks.
User questions about EAHT-E9-FB-3D-30 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual EAHT-E9-FB-3D-30 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EAHT-E9-FB-3D-30 by Festo.
USER MANUAL EAHT-E9-FB-3D-30 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : EAHT-E9-FB-3D-30
Category : Uncategorized