Growatt

SPI 750-4000TL2-HV - Inverter Growatt - Free user manual and instructions

Find the device manual for free SPI 750-4000TL2-HV Growatt in PDF.

📄 29 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Growatt SPI 750-4000TL2-HV - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Grid-Tied String Inverter
Model SPI 750-4000TL2-HV
Power Range 750 W to 4000 W
Input Voltage Range 200 V - 900 V DC
MPPT Voltage Range 250 V - 800 V DC
Number of MPPT Trackers 2
Maximum Efficiency 97.5%
European Efficiency 96.8%
Output Voltage 230 V AC (single phase)
Frequency 50 Hz / 60 Hz
Weight 11 kg (approx.)
Dimensions (W x H x D) 330 x 430 x 160 mm
Display LCD with backlight
Communication USB, RS485, Wi-Fi (optional)
Protection Features Overcurrent, overvoltage, reverse polarity, islanding, surge
Cooling Natural convection (fanless)
Enclosure Rating IP65
Operating Temperature -25°C to +60°C
Warranty 5 years (extendable)
Certifications VDE-AR-N 4105, IEC 62109, AS/NZS 4777

Frequently Asked Questions - SPI 750-4000TL2-HV Growatt

What is the maximum input voltage for the Growatt SPI 750-4000TL2-HV?
The maximum input voltage is 900 V DC. Ensure that the PV array open-circuit voltage does not exceed this limit.
How do I connect the inverter to my home network?
The inverter supports optional Wi-Fi communication via a separate module. Alternatively, use the RS485 or USB port for wired connection.
What type of solar panels are compatible?
Any standard polycrystalline or monocrystalline panels with an MPPT voltage range of 250 V to 800 V DC can be used. Ensure total power does not exceed 4000 W.
Can I install the inverter outdoors?
Yes, the enclosure is rated IP65, meaning it is dust-tight and protected against low-pressure water jets. However, avoid direct sunlight and heavy rain.
How do I reset the inverter after a fault?
Turn off the AC disconnect switch and the DC disconnect switch, wait 5 minutes, then turn them back on. The inverter will restart automatically.
What is the efficiency of this inverter at low load?
The European efficiency is 96.8%, but peak efficiency reaches 97.5%. At low loads (10-20%), efficiency is typically above 95%.
How do I clean the inverter?
Use a dry or slightly damp cloth to wipe the enclosure. Do not use any solvents or abrasive cleaners. Ensure the inverter is off before cleaning.
Does the inverter have a display?
Yes, it features an LCD display showing real-time power, energy yield, status, and fault codes.
What is the warranty period?
Standard warranty is 5 years. It can be extended up to 10 or 15 years with an optional service contract.
Can this inverter operate without a grid connection?
No, it is a grid-tied inverter and requires a stable grid connection to operate. It will shut down if the grid is not present.

User questions about SPI 750-4000TL2-HV Growatt

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Inverter in PDF format for free! Find your manual SPI 750-4000TL2-HV - Growatt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPI 750-4000TL2-HV by Growatt.

USER MANUAL SPI 750-4000TL2-HV Growatt

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Growatt

Model : SPI 750-4000TL2-HV

Category : Inverter