IR Sensor - Capteur IR Extron - Free user manual and instructions
Find the device manual for free IR Sensor Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IR Sensor |
| Brand | Extron |
| Model | IR Sensor (Generic Extron IR Receiver) |
| Dimensions (HxWxD) | 1.0 x 2.0 x 0.5 inches (25.4 x 50.8 x 12.7 mm) |
| Weight | 0.1 lbs (45 g) |
| Power Supply | Via connection to Extron control system (5V DC) |
| Connector Type | 3.5 mm mini jack or captive screw |
| IR Reception Window | Broad angle (approx. 60°) |
| Carrier Frequency Range | 30 - 60 kHz |
| Range | Up to 50 feet (15 meters) line of sight |
| Mounting Type | Surface mount (adhesive or screw) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity Tolerance | 0% to 90% non-condensing |
| Compatibility | Works with Extron control processors and switchers |
| LED Indicator | Red LED blinks when receiving signal |
| Primary Function | Receives IR commands from remote controls and transmits to Extron system |
| Typical Application | AV system control in conference rooms, classrooms, etc. |
| Maintenance | Clean lens with soft cloth; avoid solvents |
| Safety Precautions | Do not expose to direct sunlight or heat sources |
| Spare Parts / Repairability | No user-serviceable parts; replace unit if defective |
| Included Accessories | Mounting bracket, adhesive pad, 6 ft cable |
| Warranty | 3 years (extended available) |
| Regulatory Compliance | CE, FCC Class A |
Frequently Asked Questions - IR Sensor Extron
How do I connect the Extron IR Sensor to my control system?
Connect the sensor's 3.5 mm mini jack or captive screw connector to the IR input port on your Extron control processor. Ensure the polarity matches if using screws.
What is the maximum operating distance of the IR Sensor?
The sensor has a line-of-sight range up to 50 feet (15 meters) under optimal conditions. Walls or obstacles may reduce range.
Can I use the IR Sensor with non-Extron devices?
It is designed specifically for Extron control systems and may not work with third-party equipment without a compatible interface.
Does the sensor require external power?
The sensor is powered by the connected Extron control processor via the IR port; no separate power supply is needed.
How do I mount the IR Sensor?
Use the included adhesive pad to stick it to a flat surface, or screw the bracket into a mounting plate. Ensure the lens has clear line of sight to the remote.
What does the red LED on the sensor indicate?
The red LED blinks when the sensor receives an IR signal, confirming that commands are being transmitted.
Can I clean the IR sensor lens?
Yes, gently wipe the lens with a soft, dry cloth. Do not use liquids or abrasive cleaners.
What should I do if the sensor stops working?
Check the cable connection and try a different IR port. If the LED does not blink when a remote is used, the sensor may need replacement.
Is the IR Sensor compatible with all Extron remote controls?
It works with most Extron IR remotes using standard carrier frequencies (30-60 kHz). For specific compatibility, consult your product manual.
Can I extend the cable length of the IR Sensor?
Yes, you can use a standard 3.5 mm extension cable, but keep total length under 25 feet to avoid signal degradation.
User questions about IR Sensor Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Capteur IR in PDF format for free! Find your manual IR Sensor - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IR Sensor by Extron.
USER MANUAL IR Sensor Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : IR Sensor
Category : Capteur IR