PC-3WR - Loudspeaker TOA - Free user manual and instructions
Find the device manual for free PC-3WR TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | TOA |
| Model | PC-3WR |
| Dimensions (W x H x D) | 200 mm x 300 mm x 150 mm |
| Weight | 3.2 kg |
| Power Handling | 30 W (RMS) |
| Impedance | 8 ohms |
| Frequency Response | 80 Hz – 20 kHz |
| Sensitivity | 90 dB (1W/1m) |
| Driver Configuration | 1 x 1" tweeter, 1 x 3" full-range |
| Enclosure Material | ABS plastic |
| Mounting Type | Wall mount (bracket included) |
| Color | White |
| Connectivity | Spring-loaded terminals |
| Input Voltage | 100 V line (transformer) |
| Operating Temperature | -10°C to 50°C |
| Clean and Care | Wipe with dry cloth; avoid liquids |
| Safety | Do not expose to rain; use supplied brackets |
| Spare Parts | Contact TOA dealer for grilles, drivers |
| General Information | For indoor use only; professional installation recommended |
Frequently Asked Questions - PC-3WR TOA
How do I wire the PC-3WR loudspeaker?
Connect the amplifier output to the spring-loaded terminals. Ensure correct polarity: red to positive (+), black to negative (-). For 100V line systems, use the transformer tap matching the system voltage.
What is the recommended amplifier power?
Use an amplifier rated between 30W and 60W at 8 ohms per channel to avoid distortion and damage.
Can I use the PC-3WR outdoors?
No, this speaker is designed for indoor use only. It is not weatherproof.
How do I mount the speaker?
Use the included wall bracket. Secure the bracket to a wall stud or solid surface, then attach the speaker by sliding it onto the bracket until it locks.
What is the impedance of the speaker?
The impedance is 8 ohms for low-impedance operation. For 100V line systems, the transformer provides multiple impedance taps.
How do I clean the speaker?
Wipe the enclosure with a dry, soft cloth. Do not use water or cleaning solvents as they may damage the finish.
What should I do if there is no sound?
Check that the amplifier is on and connected. Verify polarity and that the terminals are secure. Test with another speaker to isolate the issue.
Can I paint the speaker?
Yes, the cabinet can be painted with water-based paint. Remove the grille first and mask the drivers to avoid coating them.
What type of cable should I use?
For low-impedance use, 16-18 AWG speaker wire is sufficient for runs up to 50 feet. For 100V line, use appropriate gauge for voltage drop.
Where can I find spare parts?
Contact an authorized TOA dealer or visit the TOA website for replacement grilles, drivers, and brackets.
User questions about PC-3WR TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PC-3WR - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PC-3WR by TOA.
USER MANUAL PC-3WR TOA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TOA
Model : PC-3WR
Category : Loudspeaker