TAC-28CHSD/TPG11IT - Air conditioner TCL - Free user manual and instructions
Find the device manual for free TAC-28CHSD/TPG11IT TCL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Cooling Capacity | 2.8 kW (9,500 BTU/h) |
| Heating Capacity | 3.0 kW (10,200 BTU/h) |
| Energy Efficiency | SEER 4.0 (Class A) |
| Refrigerant | R32 |
| Compressor Type | Inverter |
| Indoor Unit Dimensions (WxHxD) | 800 x 280 x 200 mm |
| Outdoor Unit Dimensions (WxHxD) | 700 x 550 x 250 mm |
| Indoor Unit Weight | 10 kg |
| Outdoor Unit Weight | 25 kg |
| Power Supply | 220-240V ~ 50Hz |
| Cooling Power Input | 900 W |
| Heating Power Input | 1,000 W |
| Airflow (High Speed) | 600 m³/h |
| Noise Level (Indoor) | 25 - 40 dB(A) |
| Noise Level (Outdoor) | 55 dB(A) |
| Functions | Cooling, Heating, Fan, Dehumidification, Timer, Sleep Mode, Swing, Self-Cleaning |
| Filter | Washable Anti-Bacterial Filter |
| Remote Control | Yes (with LCD display) |
| Warranty | 2 years |
| Recommended Room Size | Up to 25 m² |
| Maintenance | Clean filter every 2 weeks; professional service annually |
| Safety Note | R32 refrigerant is flammable; install per manual |
Frequently Asked Questions - TAC-28CHSD/TPG11IT TCL
How to clean the air filter?
Turn off and unplug the unit. Open the front panel, remove the filter, and wash it with mild detergent and water. Let it dry completely before reinstalling. Clean every 2 weeks for optimal performance.
Why is my air conditioner not cooling?
Check if the air filter is dirty, the thermostat is set correctly, and the outdoor unit is not obstructed. If the issue persists, reset the unit or contact a professional.
What do the error codes mean?
Refer to the user manual for a full list. Common codes: E1 (sensor fault), E2 (defrost), E3 (overload). If an error appears, turn off the unit and call service.
How to use the timer function?
Press the TIMER button on the remote. Use +/- to set the desired on/off time. Press TIMER again to confirm. The unit will start/stop automatically.
Can I use an extension cord?
No. Do not use an extension cord or adapter. Plug the air conditioner directly into a dedicated power outlet rated for the unit's amperage.
How often should I service the unit?
Perform a professional maintenance at least once a year. Clean the filter every 2 weeks. Check the outdoor unit for debris before each season.
What refrigerant does it use?
This unit uses R32 refrigerant, which is environmentally friendly but flammable. Only qualified technicians should handle refrigerant.
How to reset the remote control?
Remove the batteries from the remote, press any button for 3 seconds, then reinsert the batteries. If it still doesn't work, replace the batteries or contact support.
Is the outdoor unit waterproof?
The outdoor unit is designed for outdoor installation but is not fully waterproof. It should be installed under a shelter if possible to extend its life.
How to set the temperature in Fahrenheit?
While the remote is off, press and hold the MODE and TEMP DOWN buttons simultaneously for 5 seconds. The display will switch between Celsius and Fahrenheit.
User questions about TAC-28CHSD/TPG11IT TCL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual TAC-28CHSD/TPG11IT - TCL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TAC-28CHSD/TPG11IT by TCL.
USER MANUAL TAC-28CHSD/TPG11IT TCL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TCL
Model : TAC-28CHSD/TPG11IT
Category : Air conditioner