190TMHD-KFA - Heating Master - Free user manual and instructions
Find the device manual for free 190TMHD-KFA Master in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Kerosene Forced Air Heater |
| Model | 190TMHD-KFA |
| Brand | Master |
| Heat Output | 190,000 BTU/h |
| Fuel Type | Kerosene (or diesel) |
| Fuel Tank Capacity | 15 gallons |
| Burn Time | Approximately 10 hours at full output |
| Air Flow | 450 CFM |
| Coverage Area | Up to 4,500 sq ft |
| Power Source | 120V AC, 60 Hz, 2.5A |
| Ignition | Spark plug ignition with automatic shutdown |
| Dimensions (L x W x H) | 30 x 18 x 20 inches |
| Weight | 48 lbs |
| Safety Features | Tip-over switch, overheat thermostat, flame sensor |
| Noise Level | ~70 dB at 10 ft |
| Maintenance | Clean and replace fuel filter, clean combustion chamber and spark plug |
| Certifications | CSA, ETL |
| Warranty | 1 year limited factory warranty |
| Spare Parts | Available through Master distributors (e.g., pump, fan motor, ignitor) |
| Usage | Indoor/outdoor construction, industrial, agricultural |
Frequently Asked Questions - 190TMHD-KFA Master
What type of fuel does the Master 190TMHD-KFA use?
The Master 190TMHD-KFA is designed to burn kerosene or diesel fuel. Use only clean, clear K-1 kerosene or ultra-low sulfur diesel for optimal performance and to reduce odor.
How do I start the heater?
1. Fill the fuel tank. 2. Plug the heater into a grounded 120V outlet. 3. Turn the power switch to ON. 4. The ignition will spark and the heater will fire. If it does not light, wait 5 minutes before attempting again to avoid flooding.
What is the maximum coverage area?
The heater can cover up to 4,500 square feet of open space. For enclosed areas, ensure proper ventilation to avoid carbon monoxide buildup.
How long can the heater run on a full tank?
With a 15-gallon tank and at maximum output (190,000 BTU/h), the burn time is approximately 10 hours. Running on low may extend runtime.
What safety features does it have?
The heater includes a tip-over switch that shuts off the unit if it falls, an overheat thermostat that prevents overheating, and a flame sensor that stops fuel flow if the flame goes out.
Can I use the heater indoors?
Yes, but only in well-ventilated areas. The heater consumes oxygen and produces carbon monoxide. Do not use in occupied, poorly ventilated spaces. Open a door or window slightly to allow fresh air.
How often should I clean the heater?
Clean the combustion chamber, spark plug, and replace the fuel filter after every 500 hours of operation or at the start of each heating season. Regular maintenance ensures efficient and safe operation.
What is the noise level?
The heater operates at about 70 dB at a distance of 10 feet, similar to a vacuum cleaner. Use ear protection if working nearby for extended periods.
Where can I buy spare parts?
Spare parts such as fuel pump, fan motor, ignitor, and fuel filters are available from Master dealers and online retailers. Use only genuine parts for safety and reliability.
Why does the heater shut off during operation?
Common causes: Low fuel (tank empty), overheating (dirty air intake), tip-over, or faulty flame sensor. Check fuel level, clean the heater, and ensure it's on a stable surface. If problem persists, contact service.
User questions about 190TMHD-KFA Master
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual 190TMHD-KFA - Master and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 190TMHD-KFA by Master.
USER MANUAL 190TMHD-KFA Master
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Master
Model : 190TMHD-KFA
Category : Heating