AXLOC4M-80 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXLOC4M-80 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Output Converter |
| Brand | AXESS |
| Model | AXLOC4M-80 |
| Number of Channels | 4 |
| Max Input Power (per channel) | 80W |
| Input Type | Speaker Level (high-level) |
| Output Type | RCA (low-level) |
| Power Supply | Passive (no external power required) |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >90 dB |
| Total Harmonic Distortion (THD) | <0.05% |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ω |
| Dimensions (L x W x H) | 2.5 x 1.5 x 0.8 inches |
| Weight | 0.15 lbs |
| Housing Material | ABS Plastic |
| Connector Type | Screw terminals for input, RCA jacks for output |
| Installation | Inline, connect between factory speaker outputs and aftermarket amplifier |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Ensure correct polarity; avoid short circuits; disconnect battery during installation |
| Compatibility | Most factory stereo systems with speaker-level outputs |
Frequently Asked Questions - AXLOC4M-80 AXESS
What is the AXESS AXLOC4M-80 used for?
The AXLOC4M-80 is a 4-channel line output converter designed to convert high-level speaker signals from a factory stereo into low-level RCA outputs for an aftermarket amplifier.
Does this device require external power?
No, the AXLOC4M-80 is passive and does not need an external power source. It draws signal power from the speaker outputs.
What is the maximum input power per channel?
Each channel can handle up to 80W of input power. Exceeding this may damage the converter.
How do I connect the AXLOC4M-80?
Connect the factory speaker wires to the screw terminals (input side) and then run RCA cables from the converter’s outputs to your amplifier. Ensure correct polarity (+ and -) for each channel.
Can I use this with a 2-channel amplifier?
Yes, you can use just two channels of the converter. Unused channels can be left disconnected or terminated.
What type of RCA cables should I use?
Use standard RCA cables. Shielded cables are recommended to reduce noise interference.
Will this work with a Bose or premium factory system?
It is compatible with most factory systems that have speaker-level outputs, including premium systems, but verify that the output signal is not already processed or amplified beyond 80W per channel.
How do I troubleshoot no sound from the amplifier?
Check that speaker inputs are connected to the correct terminals, verify polarity, ensure RCA cables are fully inserted, and confirm that the amplifier is powered on. Also test with a known working source.
Does the AXLOC4M-80 have a ground loop isolator?
No, it does not include a ground loop isolator. If you experience alternator whine, consider adding an external ground loop isolator in line with the RCA cables.
How do I clean and maintain this device?
Clean with a soft, dry cloth. Avoid liquids and solvents. Inspect connections periodically for corrosion or looseness.
User questions about AXLOC4M-80 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXLOC4M-80 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXLOC4M-80 by AXESS.
USER MANUAL AXLOC4M-80 AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AXLOC4M-80
Category : Uncategorized