ANC-CHH2 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free ANC-CHH2 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Active Noise Cancelling Headphones |
| Brand | AXESS |
| Model | ANC-CHH2 |
| Connectivity | Bluetooth 5.0 |
| Driver Size | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Active Noise Cancellation | Yes, Hybrid ANC |
| Battery Life (ANC On) | Up to 20 hours |
| Battery Life (ANC Off) | Up to 30 hours |
| Charging Port | USB-C |
| Charging Time | Approx. 2 hours |
| Microphone | Built-in, for calls and voice assistant |
| Controls | Touch or physical buttons on earcup |
| Weight | Approx. 250 g |
| Dimensions (folded) | 180 x 150 x 50 mm |
| Foldable Design | Yes, for portability |
| Ear Cushion Material | Memory foam with leatherette |
| Headband Adjustment | Adjustable, padded |
| Included Accessories | USB-C cable, 3.5 mm audio cable, carrying case, user manual |
| Compatibility | Smartphones, tablets, computers with Bluetooth |
| Warranty | 1 year limited |
Frequently Asked Questions - ANC-CHH2 AXESS
How do I pair the ANC-CHH2 headphones with my phone?
Turn on the headphones by pressing and holding the power button. The LED will flash blue and red. Enable Bluetooth on your phone and select ANC-CHH2 from the list. If prompted, enter 0000 as the PIN.
How do I activate the Active Noise Cancellation?
Press the ANC button on the left earcup to toggle noise cancellation on or off. The LED indicator will show green when ANC is active.
Can I use the headphones while charging?
Yes, the headphones support passive use with the included audio cable even when the battery is depleted. However, for wireless use, charging is required.
How long does it take to fully charge the battery?
Using the provided USB-C cable and a standard 5V/1A charger, the headphones charge fully in approximately 2 hours.
Are the ear cushions replaceable?
Yes, the ear cushions are attached with a twisting mechanism and can be replaced if worn out. Contact AXESS support or see the user manual for compatible replacement parts.
How do I reset the headphones?
If the headphones are unresponsive, press and hold the power button and volume up simultaneously for 5 seconds until the LED flashes purple. This will reset the device.
Can I connect to multiple devices at once?
The ANC-CHH2 supports multipoint connection, allowing you to connect to two devices simultaneously (e.g., phone and laptop). To switch, pause audio on one device and play on the other.
What do the LED colors mean?
Blue flashing: pairing mode. Solid blue: connected. Green: ANC active. Red flashing: low battery. Purple (during reset): factory reset in progress.
How do I clean the headphones?
Use a soft, dry cloth to wipe the exterior. For ear cushions, remove them and gently clean with a damp cloth. Do not use alcohol or abrasive cleaners. Allow to dry before reattaching.
Is the microphone suitable for calls?
Yes, the built-in microphone picks up your voice clearly with noise reduction for calls. Ensure the headphones are properly positioned and the microphone openings are not blocked.
User questions about ANC-CHH2 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ANC-CHH2 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ANC-CHH2 by AXESS.
USER MANUAL ANC-CHH2 AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : ANC-CHH2
Category : Uncategorized