AC120TN4PKC - Air conditioner SAMSUNG - Free user manual and instructions
Find the device manual for free AC120TN4PKC SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Split-system air conditioner (cooling only) |
| Model | AC120TN4PKC |
| Brand | Samsung |
| Cooling capacity | 12,000 BTU/h (3.5 kW) |
| Energy efficiency ratio (EER) | 3.2 (approx.) |
| Power supply | 220-240 V / 50 Hz / 1 phase |
| Refrigerant | R-410A |
| Indoor unit dimensions (W x H x D) | 870 x 285 x 215 mm |
| Outdoor unit dimensions (W x H x D) | 790 x 548 x 285 mm |
| Indoor unit weight | 10.5 kg |
| Outdoor unit weight | 33.0 kg |
| Air flow rate (indoor) | 450 m³/h (high) |
| Noise level (indoor) | 29-43 dB(A) |
| Noise level (outdoor) | 50-55 dB(A) |
| Filter type | Washable pre-filter + carbon filter |
| Remote control | Yes, with LCD display |
| Operating modes | Cool, Fan, Dry, Auto, Sleep, Turbo |
| Timer | On/Off timer (1-24 hours) |
| Self-cleaning function | Yes (heat exchanger anti-bacterial coating) |
| Refrigerant piping | Liquid: 6.35 mm (1/4"), Gas: 9.52 mm (3/8") |
| Max. piping length | 15 m |
| Max. elevation difference | 8 m |
| Warranty | 1 year parts and labor (extended available) |
Frequently Asked Questions - AC120TN4PKC SAMSUNG
How do I clean the air filter?
Turn off the unit and open the front panel. Remove the filter, wash it with warm water and mild detergent, then dry it thoroughly before reinserting. For best performance, clean every 2 weeks.
What is the recommended temperature setting for energy saving?
For cooling, set the thermostat to 24-26°C (75-78°F). Each degree lower can increase energy consumption by about 6%.
How do I use the timer function?
Press the Timer button on the remote control. Use the +/- buttons to set the desired time (1-24 hours). Press Set to confirm. The unit will turn on or off automatically at the set time.
Why is the air conditioner not cooling properly?
Check if the filter is dirty. Ensure the outdoor unit is not obstructed. Verify that the room is not too large for the capacity (12,000 BTU covers approx. 25-40 sqm). Also check the set temperature is lower than room temperature.
What does the 'E1' error code mean?
Error code E1 typically indicates a problem with the indoor unit's room temperature sensor. Try turning the unit off and on. If the error persists, contact a qualified technician.
How often should I service the air conditioner?
Professional servicing is recommended once a year before the cooling season. This includes cleaning the coils, checking refrigerant levels, and inspecting electrical connections.
Can I install the air conditioner myself?
It is recommended to have a professional installer handle the installation to ensure proper refrigerant handling, electrical connections, and drainage. Improper installation may void the warranty.
How do I reset the air conditioner?
Turn off the unit and unplug it (or turn off the circuit breaker). Wait 5 minutes, then plug it back in and turn it on. This resets the control board.
The remote control stopped working. What should I do?
First, replace the batteries (AAA). Ensure nothing is blocking the infrared signal. If it still doesn't work, try using the manual control button on the indoor unit (if available) or contact support.
How do I activate the Turbo mode?
Press the Turbo button on the remote control. The unit will run at maximum fan speed and compressor capacity to cool the room quickly. Turbo mode usually runs for 30 minutes and then returns to normal operation.
User questions about AC120TN4PKC SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual AC120TN4PKC - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC120TN4PKC by SAMSUNG.