BSA-950LM - Uncategorized Maruyama - Free user manual and instructions
Find the device manual for free BSA-950LM Maruyama in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Petrol Brush Cutter |
| Brand | Maruyama |
| Model | BSA-950LM |
| Engine Displacement | 33.6 cc |
| Power Output | 1.35 kW |
| Fuel Tank Capacity | 0.75 L |
| Cutting Width | 455 mm |
| Weight (dry) | 5.8 kg |
| Overall Length | 1850 mm |
| Drive Type | Centrifugal Clutch |
| Fuel Type | Unleaded Petrol + 2-Stroke Oil (50:1) |
| Ignition System | Electronic (CDI) |
| Starter Type | Recoil Starter |
| Cutting Head | Tap & Go Nylon Line Head |
| Line Diameter | 2.4 mm |
| Noise Level (LWA) | 109 dB(A) |
| Vibration Level (ahv,eq) | 5.5 m/s² |
| Maintenance | Clean air filter, spark plug, and fuel filter regularly |
| Safety Features | Throttle lock, stop switch, protective guard |
| Spare Parts | Air filter, spark plug, fuel filter, line spool, cutting blade (optional) |
| Repairability | User-serviceable with basic tools; professional service recommended for engine repairs |
Frequently Asked Questions - BSA-950LM Maruyama
What is the fuel mixture for the Maruyama BSA-950LM?
Use a 50:1 ratio of unleaded petrol to 2-stroke oil. Mix thoroughly before refuelling.
How do I start the BSA-950LM brush cutter?
Ensure the stop switch is in the 'I' position, press the primer bulb until fuel appears in the return line, set the choke if cold, pull the recoil starter cord slowly until resistance, then pull briskly.
What type of cutting line should I use?
Use 2.4 mm diameter nylon line. Replace the line when it becomes worn to maintain cutting efficiency.
How often should I clean the air filter?
Clean or replace the air filter every 10 operating hours or more frequently in dusty conditions to ensure proper engine performance.
What safety equipment should I wear?
Always wear safety goggles, hearing protection, sturdy gloves, long trousers, and boots. Never operate without the protective guard fitted.
Why does the engine not start?
Check that the stop switch is on, the fuel tank is filled with fresh mixture, the spark plug is clean and properly gapped, and the air filter is clean. Also ensure the choke is used correctly.
Can I use a metal blade instead of nylon line?
Yes, the BSA-950LM can be fitted with an optional metal blade for light brush. Ensure the correct blade guard is installed and follow the manual for installation.
How do I trim the nylon line automatically?
The trimmer head features a 'Tap & Go' system. Tap the head lightly on the ground while the engine is at idle to release more line; the line cutter will trim it to the correct length.
What is the recommended storage procedure?
Drain the fuel tank, run the engine until it stops, clean the unit thoroughly, lubricate exposed metal parts, and store in a dry, frost-free place.
Where can I find replacement parts?
Contact an authorized Maruyama dealer or order online. Common parts include air filters, spark plugs, fuel filters, line spools, and blades.
User questions about BSA-950LM Maruyama
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BSA-950LM - Maruyama and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSA-950LM by Maruyama.
USER MANUAL BSA-950LM Maruyama
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Maruyama
Model : BSA-950LM
Category : Uncategorized