KAFMTMUSBCA - Receiver Kogan - Free user manual and instructions
Find the device manual for free KAFMTMUSBCA Kogan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Receiver |
| Brand | Kogan |
| Model | KAFMTMUSBCA |
| Power Output | 2 x 50W RMS (8 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
| Inputs | USB, AUX (3.5mm), FM Antenna |
| Outputs | Speaker terminals (spring clips), Headphone jack (3.5mm) |
| Radio Band | FM 87.5 - 108 MHz |
| USB Playback | MP3, WAV from USB 2.0 drives up to 32GB |
| Dimensions (W x H x D) | 430 x 140 x 350 mm |
| Weight | 5.0 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 150W (max), <1W (standby) |
| Material | Metal chassis, plastic front panel |
| Color | Black |
| Remote Control | Included (CR2032 battery) |
| Speaker Impedance | 4-8 ohms |
| Signal-to-Noise Ratio | >80 dB |
| Total Harmonic Distortion | <0.5% |
| Safety Features | Overload protection, short circuit protection |
| Cleaning Instructions | Wipe with dry soft cloth; avoid liquids and solvents |
| Spare Parts Availability | Contact Kogan support for replacement parts |
| Repairability Index | 4/10 (limited repairability, professional service recommended) |
Frequently Asked Questions - KAFMTMUSBCA Kogan
How do I connect speakers to the KAFMTMUSBCA receiver?
Connect speaker wires to the spring clip terminals on the back. Ensure correct polarity: red to red (+), black to black (-). Recommended impedance is 4-8 ohms.
How can I play music from a USB drive?
Insert a USB drive (FAT32, up to 32GB) with MP3 or WAV files into the USB port on the front panel. The receiver will automatically detect and start playback. Use Source button to select USB mode.
How do I tune into FM radio stations?
Press Source to select FM mode. Use the Tuning knob or Seek buttons to scan frequencies. Connect the included FM antenna for better reception.
Why is there no sound from the speakers?
Check that speakers are properly connected, receiver is turned on, volume is not at minimum, and the correct source is selected. Also ensure the Mute function is not active.
How can I reset the receiver to factory settings?
While the unit is on, press and hold the Power button on the front panel for about 5 seconds until 'RESET' appears on the display. Release; the unit will restart.
The remote control is not working. What should I do?
Replace the CR2032 battery in the remote. Ensure there is no obstruction between remote and receiver's IR sensor. Point directly at the front panel within 5 meters.
Can I connect a turntable to this receiver?
Yes, if your turntable has a built-in preamp or you use an external phono preamp. Connect the audio output to the AUX input using an RCA-to-3.5mm cable.
How should I clean the receiver?
Unplug the unit. Wipe the exterior with a soft, dry cloth. Do not use any liquids, abrasives, or solvents. Keep ventilation openings free of dust.
What is the power consumption in standby mode?
Standby power consumption is less than 1 watt. For full specifications, refer to the user manual.
What is the warranty period for this product?
Kogan offers a 12-month warranty from the date of purchase. For warranty claims, contact Kogan customer support with your proof of purchase.
User questions about KAFMTMUSBCA Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual KAFMTMUSBCA - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KAFMTMUSBCA by Kogan.
USER MANUAL KAFMTMUSBCA Kogan
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kogan
Model : KAFMTMUSBCA
Category : Receiver