WM8141 - Washing machine Sauber - Free user manual and instructions
Find the device manual for free WM8141 Sauber in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Model | WM8141 |
| Brand | Sauber |
| Capacity | 8 kg |
| Spin Speed | 1400 rpm |
| Energy Class | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
| Weight | 70 kg |
| Power Supply | 220-240 V, 50 Hz |
| Water Consumption per Cycle | 50 L |
| Annual Energy Consumption | 180 kWh |
| Noise Level (Wash/Spin) | 55 dB / 75 dB |
| Number of Programs | 15 |
| Control Type | Electronic with LED Display |
| Drum Material | Stainless Steel |
| Installation Type | Freestanding |
| Door Opening Angle | 180 degrees |
| Features | Delay Start, Child Lock, Quick Wash, Eco Wash, Rinse Plus, Anti-Crease |
| Safety Features | Overflow Protection, Unbalanced Load Detection, Foam Detection |
| Maintenance | Clean lint filter regularly, descale every 3 months, check drain hose |
| Repairability | Spare parts available for 10 years |
Frequently Asked Questions - WM8141 Sauber
How do I install the washing machine?
Ensure the machine is on a level surface. Remove transport bolts, connect water inlet hose to a cold water tap, attach drain hose to a standpipe or sink, and plug into a grounded outlet.
What should I do if the machine does not start?
Check if the door is closed properly, the water supply is on, the drain hose is not blocked, and the machine is plugged in. Also ensure the child lock is not activated.
How do I clean the detergent drawer?
Press the release button to remove the drawer. Wash it under running water to remove residue. Clean the compartment with a brush. Reinsert after drying.
What does the error code 'E20' mean?
E20 indicates a drain problem. Check the drain hose for kinks or blockages, clean the drain pump filter, and ensure the standpipe is not clogged.
Can I use liquid detergent?
Yes, but use the designated liquid detergent compartment or a dispenser ball. Do not exceed the maximum fill line. For prewash, pour liquid into the prewash compartment.
How do I activate the child lock?
Press and hold the 'Child Lock' button (or a combination of buttons, see manual) for 3 seconds. An indicator will light up. To deactivate, repeat.
Why is my laundry still wet after a cycle?
Check that you selected a proper spin speed. The machine may have reduced spin due to an unbalanced load. Redistribute laundry and run a spin-only cycle.
How often should I descale the machine?
Descale every 3 months, especially in hard water areas. Use a commercial descaler or citric acid. Run an empty 90°C cycle with the descaler.
What is the maximum load for a delicate cycle?
For delicate items, reduce the load to half of the machine's capacity (approximately 4 kg) to avoid damage. Always check garment care labels.
How do I replace the door seal?
Disconnect power and water. Remove the front panel or top panel (depending on model). Release the spring clip and old seal. Install the new seal, ensuring the drain holes at the bottom. Reassemble.
User questions about WM8141 Sauber
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WM8141 - Sauber and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM8141 by Sauber.
USER MANUAL WM8141 Sauber
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Sauber
Model : WM8141
Category : Washing machine