LUM-310X - Monitor TVLogic - Free user manual and instructions
Find the device manual for free LUM-310X TVLogic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | TVLogic |
| Model | LUM-310X |
| Product Type | Professional Broadcast Monitor |
| Screen Size | 31 inches |
| Resolution | 1920 x 1080 (Full HD) |
| Panel Type | IPS LCD |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angles | 178° / 178° |
| Inputs | 3G-SDI, HDMI, DVI, Composite, VGA |
| Outputs | SDI Loop-through |
| Audio | Built-in Speakers (2 x 5W) |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 80W (typical) |
| Weight | 15 kg (approx.) |
| Dimensions (W x H x D) | 752 x 480 x 100 mm |
| VESA Mount | 100 x 100 mm |
| Key Features | Waveform, Vectorscope, Focus Assist, False Color, Pixel Zoom |
| Usage | Studio, Field Production, Post-Production |
| Cleaning | Use a soft, dry cloth. Avoid liquid cleaners. |
| Safety | Operate in well-ventilated area. Do not block vents. |
| Spare Parts & Reparability | Contact authorized service center for genuine parts. |
Frequently Asked Questions - LUM-310X TVLogic
How do I calibrate the LUM-310X monitor?
Use the built-in calibration menu or connect a colorimeter via USB. Access the OSD menu under 'Calibration' to adjust RGB gains and gamma.
What video formats does the LUM-310X support?
It supports SD, HD, and 3G formats including 1080p, 1080i, 720p, and all standard SD resolutions via the 3G-SDI input.
Can I mount the monitor on a VESA arm?
Yes, the monitor has a VESA 100x100mm mounting pattern compatible with most standard arms and brackets.
How do I enable waveform/vectorscope?
Press the 'F1' or 'WVM' button on the front panel. Use the OSD menu to select Waveform, Vectorscope, or both.
What is the recommended cleaning procedure?
Turn off the monitor and unplug it. Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol or ammonia-based cleaners.
Does the monitor have built-in speakers?
Yes, it has two built-in 5W speakers for monitoring audio. Volume can be adjusted via the OSD menu.
How do I update the firmware?
Download the latest firmware from the TVLogic website, save it to a USB drive, and insert it into the monitor's USB port. Navigate to 'System' > 'Firmware Update' in the OSD.
What are the power requirements?
The monitor operates on AC 100-240V, 50/60Hz. It includes an IEC power cable. Maximum power consumption is about 80W.
Can I use it in outdoor environments?
The monitor is designed for indoor studio or field use. For outdoor use, protect it from direct sunlight and moisture. The brightness of 350 cd/m² is adequate for shaded areas.
How do I reset to factory settings?
Press the Menu button, go to 'System' > 'Factory Reset', and confirm. This will erase all custom settings and calibrations.
User questions about LUM-310X TVLogic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual LUM-310X - TVLogic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LUM-310X by TVLogic.
USER MANUAL LUM-310X TVLogic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TVLogic
Model : LUM-310X
Category : Monitor