Delta 6913X - Subwoofer Black Hydra - Free user manual and instructions
Find the device manual for free Delta 6913X Black Hydra in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Black Hydra |
| Model | Delta 6913X |
| Design | Bass reflex |
| Driver Size | 10 inches |
| Impedance | 4 ohms |
| Power Handling (RMS) | 200 W |
| Power Handling (Peak) | 400 W |
| Frequency Response | 20 Hz - 200 Hz |
| Sensitivity | 90 dB |
| Inputs | RCA line-level, speaker-level |
| Controls | Volume, crossover frequency, phase switch |
| Enclosure Material | MDF |
| Finish | Black textured vinyl |
| Dimensions (W x H x D) | 400 x 350 x 380 mm |
| Weight | 12 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Features | Auto power on/off, variable crossover, LFE input |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Overload protection, thermal shutdown |
Frequently Asked Questions - Delta 6913X Black Hydra
How do I connect the subwoofer to my AV receiver?
Use an RCA cable to connect the subwoofer's LFE input to the AV receiver's subwoofer pre-out. Alternatively, use speaker-level inputs if no dedicated sub out is available.
What is the recommended crossover frequency setting?
Start with the crossover set to around 80 Hz. Adjust based on your main speakers' capabilities and room acoustics.
Why is my subwoofer not producing any sound?
Ensure the subwoofer is powered on, the volume is turned up, and the input cable is securely connected. Also check that the AV receiver's subwoofer output is enabled.
How should I position the subwoofer for best bass?
Place the subwoofer in a corner or along a wall for increased bass output. Avoid placing it in the center of the room. Experiment with placement for optimal response.
Can I use this subwoofer with a 2-channel stereo system?
Yes, connect using the speaker-level inputs. Connect the amplifier's speaker outputs to the subwoofer's inputs, then from the subwoofer's outputs to your speakers.
What does the phase switch do?
The phase switch (0° or 180°) adjusts the timing of the subwoofer's output relative to the main speakers. Set it to the position that produces the fullest bass at your listening position.
The subwoofer makes a humming noise. How to fix?
Humming is often caused by a ground loop. Try using a ground loop isolator on the RCA cable, or ensure all audio components are plugged into the same power strip.
What is the auto power on/off feature?
The subwoofer automatically turns on when it detects an audio signal and turns off after a period of inactivity to save energy. You can also manually toggle power.
How do I clean and maintain the subwoofer?
Use a soft, dry cloth to wipe the exterior. Do not use water or cleaning agents. Ensure the vents are free from dust.
Where can I find the full user manual?
The full user manual is available for free download on the notice-facile.com website in PDF format.
User questions about Delta 6913X Black Hydra
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Delta 6913X - Black Hydra and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Delta 6913X by Black Hydra.