WT80C4200GG - Washing machine SAMSUNG - Free user manual and instructions
Find the device manual for free WT80C4200GG SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Top-loading washing machine |
| Model | WT80C4200GG |
| Brand | Samsung |
| Capacity | 8 kg |
| Width | 540 mm |
| Depth | 540 mm |
| Height | 850 mm |
| Weight | 38 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 500 W (wash), 2500 W (heater) |
| Water Pressure | 0.05 – 0.8 MPa |
| Spin Speed | 800 rpm (max) |
| Wash Programs | Cotton, Synthetics, Delicates, Quick Wash, Baby Care, Rinse+Spin |
| Display | LED display with cycle status |
| Control Type | Electronic dial + buttons |
| Noise Level (Wash/Spin) | 58 dB / 72 dB |
| Energy Efficiency Class | A+++ |
| Water Consumption | 48 L per cycle |
| Door Type | Top lid with safety lock |
| Lint Filter | Removable, clean after each cycle |
| Child Lock | Yes |
| Delay End | Up to 24 hours |
| Self Clean | Yes, drum maintenance program |
| Spare Parts Availability | 7 years after end of production |
Frequently Asked Questions - WT80C4200GG SAMSUNG
How do I install the washing machine?
Place the machine on a solid, level surface. Remove transit bolts from the back. Connect the water inlet hose to a tap with 0.05-0.8 MPa pressure. Attach the drain hose to a standpipe or sink drain. Plug into a grounded outlet. Level the machine by adjusting the feet.
What detergent should I use?
Use high-efficiency (HE) detergent for front-loaders (though this is a top-loader, low-suds detergent is recommended). For top-loaders, use a powder or liquid detergent. Do not use too much to avoid oversudsing.
How do I clean the lint filter?
The lint filter is located inside the drum near the top. Open the filter cover, remove lint, rinse under running water, and reinsert. Clean after every wash to maintain performance.
My washing machine is not draining. What should I do?
Check the drain hose for kinks or blockages. Ensure the drain standpipe is not clogged. Clean the lint filter. If the problem persists, the pump may be blocked; refer to the manual for pump cleaning.
Can I pause and add clothes during a cycle?
Yes, press the Start/Pause button. Wait for the door lock to release (if applicable). Open the lid carefully and add clothes. Close the lid and press Start/Pause again. Not all cycles allow this; check the display.
What do the error codes mean?
Common codes: '4E' - water supply issue; '5E' - drainage problem; 'UE' - unbalanced load; 'LE' - stuck button; 'OE' - overflow. Refer to the manual for full list. Reset by unplugging for 1 minute.
How do I run the self-cleaning cycle?
Empty the drum. Add a small amount of drum cleaner or chlorine bleach. Select the 'Self Clean' program and press Start. Do not add laundry. Run monthly to prevent mold and odors.
What is the maximum spin speed?
The maximum spin speed is 800 rpm. Use lower speeds for delicate fabrics to prevent damage.
How do I activate child lock?
Press the 'Child Lock' button (or hold Start/Pause + other button combo) to enable. The display will show a lock icon. Disable similarly. This prevents accidental button presses during the cycle.
Where can I buy spare parts?
Spare parts are available from Samsung authorized service centers or online retailers. Common parts: drain pump, belt, door lid, control board. Use original parts for safety and warranty.
User questions about WT80C4200GG SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WT80C4200GG - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WT80C4200GG by SAMSUNG.
USER MANUAL WT80C4200GG SAMSUNG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAMSUNG
Model : WT80C4200GG
Category : Washing machine