GCS1108 - Network switch IOGEAR - Free user manual and instructions
Find the device manual for free GCS1108 IOGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | IOGEAR |
| Model | GCS1108 |
| Number of Ports | 8 |
| Interface | RJ45 |
| Data Transfer Rate | 10/100/1000 Mbps |
| LED Indicators | Power, Link/Activity, Speed |
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K entries |
| Power Supply | External power adapter (5V DC) |
| Power Consumption | 4.5 Watts (max) |
| Dimensions (WxDxH) | 6.3 x 3.9 x 1.1 inches |
| Weight | 0.4 lbs |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Safety Certifications | FCC, CE |
| Plug and Play | Yes |
| Auto MDI/MDI-X | Yes |
| Fanless Design | Yes |
| Chassis Material | Metal |
Frequently Asked Questions - GCS1108 IOGEAR
How do I set up the IOGEAR GCS1108 network switch?
Connect the power adapter, then connect your devices to the ports using Ethernet cables. The switch automatically configures itself. No software installation is needed.
What is the maximum data transfer rate?
The switch supports 10/100/1000 Mbps (Gigabit) speeds on all ports, offering high-speed connections for your network devices.
Can I mount the GCS1108 on a wall?
Yes, the switch has mounting holes on the bottom for wall mounting. Use appropriate screws and anchors (not included).
How many devices can I connect?
You can connect up to 8 wired devices using standard Ethernet cables.
Does the switch support Power over Ethernet (PoE)?
No, the IOGEAR GCS1108 does not support PoE. It only passes data; each device needs its own power source.
What should I do if the switch is not working?
Check power connection, ensure cables are secure, and verify that the power LED is on. Try a different cable or device. If issues persist, reset by unplugging for 10 seconds.
Is the switch compatible with my router?
Yes, the switch works with any standard router or modem using an Ethernet connection. It is universally compatible.
How do I clean the IOGEAR GCS1108?
Disconnect the power adapter. Use a soft, dry cloth to wipe the exterior. Do not use liquids or aerosols.
Does the switch require any configuration?
No, it is an unmanaged switch. It works out of the box with no configuration required.
What is the warranty period?
IOGEAR typically offers a 3-year limited warranty. Check the product manual or IOGEAR website for details.
User questions about GCS1108 IOGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual GCS1108 - IOGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GCS1108 by IOGEAR.
USER MANUAL GCS1108 IOGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IOGEAR
Model : GCS1108
Category : Network switch