Hegel

SUPER - Uncategorized Hegel - Free user manual and instructions

Find the device manual for free SUPER Hegel in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hegel SUPER - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Stereo Integrated Amplifier
Dimensions (W x H x D) 43 cm x 10 cm x 35 cm
Weight 10 kg
Power Supply 230 V AC, 50 Hz
Power Output 2 x 50 W into 8 Ω
Frequency Response 5 Hz – 100 kHz
Total Harmonic Distortion < 0.01 %
Signal-to-Noise Ratio > 100 dB
Inputs 4x RCA, 1x XLR, 1x Phono (MM)
Outputs 1x Pre-out, 1x Headphone (6.3 mm)
Speaker Impedance 4 – 16 Ω
Controls Volume knob, input selector, power button
Remote Control Included
Standby Power Consumption < 0.5 W
Operating Temperature 5 °C – 35 °C
Housing Material Aluminum
Color Black
Maintenance Clean with dry, soft cloth; avoid solvents
Safety Do not expose to moisture; disconnect before cleaning
Spare Parts Contact authorized dealer
Repairability Service by qualified technician
General Information Refer to user manual for detailed instructions

Frequently Asked Questions - SUPER Hegel

How do I connect my turntable to the Hegel SUPER?
Use the Phono input. Ensure your turntable has a moving magnet (MM) cartridge. If not, you may need a separate phono preamp.
Can I use the Hegel SUPER with 4-ohm speakers?
Yes, the amplifier is rated for 4–16 Ω speakers. It can deliver up to 2 x 50 W into 8 Ω, with higher output into 4 Ω.
What is the purpose of the Pre-out output?
The Pre-out allows you to connect an external power amplifier or a subwoofer with a built-in crossover.
How do I reset the Hegel SUPER to factory settings?
There is no factory reset; however, power cycling the unit by unplugging for 30 seconds may resolve minor issues.
Does the Hegel SUPER have a built-in DAC?
No, the Hegel SUPER is an analog integrated amplifier without digital inputs. You will need an external DAC for digital sources.
What type of headphone output does it have?
It has a 6.3 mm headphone jack on the front panel, suitable for most headphones.
Can I bi-wire my speakers with this amplifier?
Bi-wiring is supported if your speakers have separate terminals. Simply connect two sets of speaker cables to the same amplifier output.
What is the recommended warm-up time?
Allow approximately 15 minutes for the amplifier to reach optimal performance after powering on.
How do I clean the Hegel SUPER?
Use a dry, soft cloth to wipe the surface. Avoid liquids, abrasives, or cleaning solvents.
What should I do if the amplifier does not power on?
Check the power cord connection and ensure the mains outlet is live. If the unit still does not turn on, contact your dealer for service.

User questions about SUPER Hegel

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual SUPER - Hegel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SUPER by Hegel.

USER MANUAL SUPER Hegel

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hegel

Model : SUPER

Category : Uncategorized