KPF48UYW - Range hood SMEG - Free user manual and instructions
Find the device manual for free KPF48UYW SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Smeg |
| Model | KPF48UYW |
| Installation Type | Wall-mounted |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 65-105 cm |
| Weight | 25 kg |
| Power Supply | 220-240 V / 50 Hz |
| Motor Power | 220 W |
| Extraction Rate (max) | 720 m³/h |
| Noise Level (max) | 65 dB(A) |
| Lighting | 2 x 3 W LED |
| Control Type | Electronic push buttons |
| Number of Speeds | 3 + Intensive |
| Filter Type | Grease filter (aluminum) |
| Charcoal Filter Compatible | Yes (optional) |
| Ducting Type | 150 mm diameter (recirculation or extraction) |
| Energy Class | A+ |
| Annual Energy Consumption | 40 kWh |
| Material | Stainless steel |
| Color | White |
| Mounting Height | 65-75 cm above cooking surface |
| Warranty | 2 years |
Frequently Asked Questions - KPF48UYW SMEG
How do I install the Smeg KPF48UYW range hood?
The hood should be installed by a qualified professional. Ensure the mounting height is between 65-75 cm above the cooking surface. Connect the ducting (150 mm diameter) for extraction or use the recirculation mode with a charcoal filter. Secure the hood to the wall using the provided template and screws.
How often should I clean the grease filters?
The aluminum grease filters should be cleaned every 2-3 months, or more frequently with heavy use. Remove the filters and wash them in warm soapy water or in the dishwasher. Dry thoroughly before reinstalling.
Can the hood be used in recirculation mode?
Yes, the Smeg KPF48UYW can be used in recirculation mode by installing a charcoal filter (purchased separately). This is ideal for kitchens without external ducting. Replace the charcoal filter every 6-12 months.
What is the maximum extraction rate?
The maximum extraction rate of the Smeg KPF48UYW is 720 m³/h (cubic meters per hour). This is achieved on the intensive speed setting.
How do I change the LED lights?
The LED lights are integrated and should be replaced by a qualified technician. If the lights fail, contact Smeg customer service or an authorized repair center.
Is the hood noisy?
The noise level ranges from 48 dB on the lowest speed to 65 dB on the intensive setting. This is comparable to a normal conversation at maximum speed.
What type of ducting is required?
For extraction mode, use rigid or flexible ducting with a diameter of 150 mm. Ensure the duct is as short and straight as possible to maximize airflow.
How do I activate the intensive speed?
Press the intensive button (usually marked with a 'P' or a fan symbol). The hood will run at maximum speed for a preset time (e.g., 10 minutes) then return to the previous speed.
What should I do if the hood is not working?
First, check the power supply and circuit breaker. Ensure the filters are not clogged. If the problem persists, contact Smeg support. Do not attempt to repair the motor or electronics yourself.
How do I reset the filter alarm?
After cleaning or replacing the filters, press and hold the reset button (often the light or speed button) for 3 seconds until the indicator turns off. Refer to the user manual for exact instructions.
User questions about KPF48UYW SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KPF48UYW - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KPF48UYW by SMEG.
USER MANUAL KPF48UYW SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : KPF48UYW
Category : Range hood