ANT-FP18A - Uncategorized Planet - Free user manual and instructions
Find the device manual for free ANT-FP18A Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | ANT-FP18A |
| Brand | Planet |
| Dimensions (W x D x H) | 200 mm x 150 mm x 30 mm |
| Weight | 500 g |
| Power Supply | PoE (Power over Ethernet) 48V DC |
| Wireless Standard | IEEE 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 1200 Mbps |
| Antenna Type | Internal omni-directional |
| Ethernet Ports | 1 x 10/100/1000 Mbps LAN port |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Mounting | Wall or ceiling mount |
| Security | WPA2-PSK, AES encryption |
| Management | Web GUI, SNMP |
| LED Indicators | Power, LAN, WLAN |
| Package Contents | Access point, mounting bracket, quick installation guide |
| Certifications | CE, FCC |
Frequently Asked Questions - ANT-FP18A Planet
How do I set up the ANT-FP18A for the first time?
Connect the device to your network via Ethernet and power it via PoE. Use the default IP address 192.168.1.1 to access the web interface. Default credentials are admin/admin.
What is the default IP address of the ANT-FP18A?
The default IP address is 192.168.1.1 with a subnet mask of 255.255.255.0.
How can I reset the device to factory defaults?
Press and hold the reset button on the device for about 10 seconds using a paperclip. The device will reboot with factory settings.
Does the ANT-FP18A support Power over Ethernet?
Yes, it supports PoE (802.3af) for both data and power, so no separate power adapter is needed.
What wireless security options are available?
The device supports WPA2-PSK and AES encryption. Open or WEP is also available but not recommended.
Can I mount the ANT-FP18A on a wall?
Yes, the package includes a mounting bracket for wall or ceiling installation. Follow the instructions for proper placement.
The device is not powering on. What should I check?
Ensure the Ethernet cable is connected to a PoE switch or injector. Check if the switch port is enabled and supplying power. The LED indicator should light up.
How do I update the firmware?
Download the latest firmware from the Planet website. Log in to the web GUI, go to System > Firmware Upgrade, and upload the file. Do not power off during the process.
What is the wireless range of the ANT-FP18A?
Indoor range is approximately 100 meters (328 ft) in open spaces. Actual range depends on obstacles and interference.
How can I improve the signal strength?
Place the device centrally and away from metal objects. Adjust the antenna orientation if possible. Reduce interference from other electronic devices.
User questions about ANT-FP18A Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ANT-FP18A - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ANT-FP18A by Planet.
USER MANUAL ANT-FP18A Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : ANT-FP18A
Category : Uncategorized