Enforcer 3 - Breathalyzer AlcoLimit - Free user manual and instructions
Find the device manual for free Enforcer 3 AlcoLimit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Breathalyzer |
| Brand | AlcoLimit |
| Model | Enforcer 3 |
| Dimensions (approx.) | 10 x 5 x 2 cm |
| Weight (approx.) | 100 g |
| Power Supply | 2 AAA alkaline batteries (included) |
| Battery Life | Up to 300 tests |
| Display | Digital LCD with backlight |
| Sensor Type | Electrochemical fuel cell |
| Measurement Range | 0.000 – 0.400 %BAC |
| Accuracy | ±0.005 %BAC at 0.080 %BAC |
| Detection Time | Less than 10 seconds |
| Automatic Shut-off | After 30 seconds of inactivity |
| Mouthpiece | Replaceable, hygienic design |
| Mouthpieces Included | 5 mouthpieces in the box |
| Maintenance | Clean mouthpiece after use; replace batteries as needed |
| Cleaning Instructions | Wipe exterior with dry cloth; do not use liquids |
| Calibration | Recommended every 6 months or 300 tests |
| Safety Certification | CE, FDA, RoHS compliant |
| Spare Parts Available | Replacement mouthpieces (sold separately) |
| Reparability | Non-serviceable; contact customer support for issues |
| Warranty | 1 year limited warranty |
| User Manual Language | English (PDF download available) |
Frequently Asked Questions - Enforcer 3 AlcoLimit
How accurate is the AlcoLimit Enforcer 3 breathalyzer?
The AlcoLimit Enforcer 3 has an accuracy of ±0.005 %BAC at 0.080 %BAC when properly calibrated. For best results, calibrate every 6 months or after 300 tests.
How do I calibrate the Enforcer 3?
Calibration is recommended every 6 months. You can send the device to the manufacturer or use a certified calibration service. The manual provides instructions for sending it in.
What kind of batteries does it use?
It uses 2 AAA alkaline batteries. The battery compartment is located on the back of the device.
How many tests can I do with one set of batteries?
Under normal use, you can expect up to 300 tests per set of alkaline batteries.
How do I clean the mouthpiece?
After each use, remove the mouthpiece and rinse it with warm water. Allow it to air dry completely before reuse. Do not use chemical cleaners.
Can I buy replacement mouthpieces?
Yes, replacement mouthpieces are available from AlcoLimit or authorized retailers. They are sold in packs of 10 or 20.
What does the backlight do?
The backlight illuminates the LCD display for easy reading in low-light conditions. It turns on automatically when the device is activated.
How long does it take to get a reading?
The device provides a reading in less than 10 seconds after you blow into the mouthpiece.
Is the Enforcer 3 approved for legal use?
The AlcoLimit Enforcer 3 is intended for personal use and is not certified for evidential or legal purposes. It meets CE and FDA safety standards.
What should I do if the device shows an error?
If you see an error code, consult the user manual. Common errors include low battery (replace batteries) or sensor instability (wait 1 minute and try again). For persistent errors, contact AlcoLimit customer support.
User questions about Enforcer 3 AlcoLimit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Breathalyzer in PDF format for free! Find your manual Enforcer 3 - AlcoLimit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Enforcer 3 by AlcoLimit.
USER MANUAL Enforcer 3 AlcoLimit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AlcoLimit
Model : Enforcer 3
Category : Breathalyzer