HP

DesignJet 330 - Printer HP - Free user manual and instructions

Find the device manual for free DesignJet 330 HP in PDF.

📄 184 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HP DesignJet 330 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeLarge-format inkjet plotter
BrandHP
ModelDesignJet 330
Print TechnologyHP Thermal Inkjet
Print ResolutionUp to 600 dpi (black) and 300 dpi (color)
Maximum Media Size36 inches wide (AO); roll or cut-sheet
Ink SystemFour separate ink cartridges (cyan, magenta, yellow, black)
Memory4 MB RAM (expandable)
InterfaceCentronics parallel and RS-232 serial
Dimensions (W x D x H)1050 x 640 x 430 mm (41.3 x 25.2 x 16.9 in)
Weight30 kg (66 lb)
Power ConsumptionUp to 60 W (printing), 30 W (standby)
Power Requirements100-240 VAC, 50/60 Hz
Paper HandlingRoll feed with automatic cutter; cut-sheet manual feed
Duty CycleUp to 500 prints per month (typical)
Print SpeedUp to 6 linear feet per minute (draft mode)
Language SupportHP-GL/2, HP-RTL, PJL
Noise Level< 70 dBA (operating)
Operating EnvironmentTemperature 10-35°C (50-95°F); humidity 20-80% RH
ReparabilityUser-replaceable printheads, ink cartridges, and maintenance kit
CertificationsFCC Class A, CE, CSA

Frequently Asked Questions - DesignJet 330 HP

How do I load roll paper on the HP DesignJet 330?
Open the paper drawer, lift the roll onto the spindles, insert the paper into the feed slot, and adjust the paper guides. Then close the drawer and press the Load button.
How do I replace an ink cartridge?
Open the front cover, gently pull the empty cartridge upward to remove it, and insert the new cartridge firmly until it clicks. Close the cover. The printer will automatically prime the cartridge.
Why is my printer not printing?
Check if the printer is powered on, the paper is loaded, and the ink cartridges are not empty. Ensure the computer is connected via the correct port and the printer driver is installed. Press the Reset button if the printer is stuck.
How can I improve print quality?
Run a printhead alignment from the front panel. Clean the printheads using the Clean Printheads utility in the driver or via the control panel. Use recommended HP paper and ensure the print mode (e.g., Best, Normal) matches your job.
How do I clean the printheads?
From the control panel, navigate to Maintenance > Clean Printheads. Follow on-screen instructions. This will purge ink through the nozzles to remove clogs. Repeat if necessary.
What types of paper can I use?
The DesignJet 330 supports bond paper, vellum, translucent paper, and photographic paper in roll widths up to 36 inches. Always use HP media for best results. Cut sheets can also be manually fed.
How do I connect the printer to my computer?
Use a standard Centronics parallel cable for PC connectivity or an RS-232 serial cable for older systems. Install the driver from the included disk or HP website. Configure the port settings (no flow control, 9600 baud for serial).
What do the error codes mean?
Common error codes: 01:10 – paper jam, 02:10 – ink cartridge missing, 09:10 – printhead failure. Refer to the user manual for a full list. Resolve by clearing the jam, checking cartridges, or replacing the printhead.
How do I align the cartridges?
Load a sheet of paper, then go to Maintenance > Align Printheads. The printer prints a pattern and automatically adjusts alignment. If manual alignment is needed, follow the prompts to choose the best pattern.
How do I perform a self-test?
With paper loaded, press and hold the Setup button for 3 seconds until the printer prints a test page. This page shows nozzle patterns, alignment, and firmware version.

User questions about DesignJet 330 HP

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Printer in PDF format for free! Find your manual DesignJet 330 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DesignJet 330 by HP.

USER MANUAL DesignJet 330 HP

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HP

Model : DesignJet 330

Category : Printer