ST-20F-DDF-E - Household Fan STANLEY - Free user manual and instructions
Find the device manual for free ST-20F-DDF-E STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Household Fan |
| Model | ST-20F-DDF-E |
| Brand | Stanley |
| Fan Diameter | 20 inches (approx. 50 cm) |
| Height (Adjustable) | 130–150 cm (51–59 inches) |
| Base Diameter | 38 cm (15 inches) |
| Weight | 4.5 kg (10 lbs) |
| Power Supply | 220–240 V AC, 50/60 Hz |
| Power Consumption | 55 W |
| Speed Settings | 3 (Low, Medium, High) |
| Oscillation | Yes, 90° wide angle |
| Tilt Adjustment | Manual, upward/downward |
| Control Type | Push buttons on base |
| Safety Grille | Metal, close-spaced bars |
| Overheat Protection | Built-in thermal fuse |
| Stabilizer Feet | Non-slip rubber pads |
| Cleaning Method | Unplug, wipe with damp cloth; do not immerse |
| Spare Parts Available | Blades, grille, motor, base (contact support) |
| Noise Level (Max) | Approx. 55 dB(A) |
| Cord Length | 1.5 m (5 ft) |
Frequently Asked Questions - ST-20F-DDF-E STANLEY
How do I clean the fan?
Unplug the fan first. Use a damp cloth to wipe the blades and grille. Do not use water or solvents directly on the motor. Allow all parts to dry completely before plugging back in.
How do I assemble the fan?
1. Attach the base pole to the base plate. 2. Connect the lower and upper tubes. 3. Secure the motor housing onto the tube. 4. Attach the blade and tighten the nut. 5. Snap the front grille onto the rear grille and lock with the screws.
What are the speed settings?
The fan has 3 speed levels: Low, Medium, and High. Press the corresponding button on the base to select.
Does the fan oscillate?
Yes, press the oscillation button to enable 90° wide-angle oscillation. Press again to stop at a fixed direction.
Can I adjust the fan height?
Yes, loosen the height adjustment collar, slide the tube to the desired height (130–150 cm), and tighten the collar.
Is the fan noisy?
The noise level is approximately 55 dB(A) at maximum speed, comparable to a quiet conversation.
What is the power consumption?
The fan consumes 55 Watts at full speed, making it energy-efficient for continuous use.
What safety features does it have?
It includes a sturdy base to prevent tipping, a metal safety grille with narrow gaps, and overheat protection that shuts off the motor if it gets too hot.
How do I replace a damaged blade?
Unplug the fan, remove the front grille, loosen the blade nut, and replace with a Stanley genuine spare blade. Reassemble in reverse order.
Where can I find spare parts?
Contact Stanley customer support or visit the official website to order replacement blades, grilles, or motor parts. Always use original parts for safety.
User questions about ST-20F-DDF-E STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Household Fan in PDF format for free! Find your manual ST-20F-DDF-E - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST-20F-DDF-E by STANLEY.
USER MANUAL ST-20F-DDF-E STANLEY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : STANLEY
Model : ST-20F-DDF-E
Category : Household Fan