SYBA Multimedia

SY-ENC35028 - Disk array SYBA Multimedia - Free user manual and instructions

Find the device manual for free SY-ENC35028 SYBA Multimedia in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SYBA Multimedia SY-ENC35028 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type External Disk Array Enclosure
Number of Bays 2
Compatible Drive Sizes 3.5" and 2.5" SATA HDD/SSD
Interface USB 3.0 Micro-B (backward compatible with USB 2.0)
RAID Modes JBOD, RAID 0 (stripe), RAID 1 (mirror)
Max Storage Capacity Up to 36 TB (2 x 18 TB drives)
Data Transfer Rate Up to 5 Gbps (USB 3.0)
Material Aluminum housing with plastic front bezel
Cooling Built-in ball-bearing fan (80mm)
Power Supply External 12V DC adapter (included)
Dimensions (W x D x H) 200 x 125 x 85 mm
Weight 500 g (without drives)
LED Indicators Power, HDD activity for each bay
Hot Swap Support Yes, each drive bay supports hot swapping
Operating System Support Windows, macOS, Linux (driverless)
Included Accessories USB 3.0 cable, power adapter, drive screws, user manual

Frequently Asked Questions - SY-ENC35028 SYBA Multimedia

What hard drives are compatible with the SY-ENC35028?
The enclosure supports 3.5-inch and 2.5-inch SATA hard drives or SSDs with SATA III interface. Both internal drive types are compatible.
How do I set up RAID on this disk array?
RAID modes are selected via a physical switch or jumper on the rear panel (JBOD, RAID 0, or RAID 1). Refer to the manual for exact switch positions. After setting, power cycle the unit.
Does the SY-ENC35028 require external power?
Yes, it uses an external 12V DC power adapter (included). It is not powered via USB.
Can I use drives of different capacities?
Yes, but for RAID modes, the usable capacity will be limited to the smallest drive in the array. JBOD mode uses each drive individually.
What operating systems are supported?
The device is plug-and-play on Windows, macOS, and Linux. No drivers needed for basic storage. RAID management may require software on some systems.
How do I install a hard drive into the enclosure?
Open the front bezel, slide the drive into an empty bay, and secure it with screws (included). Connect SATA and power connectors inside, then close the bezel.
Is hot swapping supported?
Yes, the enclosure supports hot swapping of drives in JBOD and RAID 1 modes. However, avoid removing a drive during RAID 0 stripe writes to prevent data loss.
What is the maximum storage capacity?
With current 18 TB SATA drives, the maximum is 36 TB in JBOD or RAID 0. RAID 1 mirrors data so max usable is 18 TB.
Does the enclosure have a fan?
Yes, it features a built-in 80mm fan for active cooling. The fan runs continuously when powered.
How do I clean and maintain the enclosure?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or harsh chemicals. Ensure the fan vent is not blocked for proper airflow.

User questions about SY-ENC35028 SYBA Multimedia

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Disk array in PDF format for free! Find your manual SY-ENC35028 - SYBA Multimedia and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SY-ENC35028 by SYBA Multimedia.

USER MANUAL SY-ENC35028 SYBA Multimedia

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SYBA Multimedia

Model : SY-ENC35028

Category : Disk array