HEP-600-15 - Cables for Computers and Peripherals Mean Well - Free user manual and instructions
Find the device manual for free HEP-600-15 Mean Well in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AC/DC Single Output Power Supply |
| Model | HEP-600-15 |
| Input Voltage | 90-264 VAC, 127-370 VDC |
| Output Voltage | 15 VDC |
| Output Current | 40 A |
| Output Power | 600 W |
| Efficiency | Up to 93% |
| Cooling Method | Built-in DC fan, forced air cooling |
| Protection Functions | Short circuit, over current, over voltage, over temperature |
| Operating Temperature | -30°C to +70°C (derating above 50°C) |
| Dimensions (L x W x H) | 215 x 115 x 50 mm |
| Weight | 1.2 kg |
| Safety Standards | UL, CUL, TUV, CCC, CB, CE, RoHS |
| Connection Type | Screw terminal block |
| Mounting Style | Chassis mount with screw holes |
| Warranty | 5 years |
Frequently Asked Questions - HEP-600-15 Mean Well
How do I connect the input wires to the HEP-600-15?
Connect the AC input wires to the terminal marked AC L (Live), AC N (Neutral), and FG (Ground). Ensure the power is off before wiring.
What is the pinout of the output terminal?
The output terminal has +V (positive) and -V (negative) terminals. Do not reverse polarity.
Can I use this power supply in parallel or series?
Parallel operation is not recommended. Series operation is possible but requires external diodes. Refer to the manual for details.
How do I adjust the output voltage?
The output voltage can be adjusted using the built-in potentiometer labeled SVR1. Turn it clockwise to increase voltage within the range of 13.5-16.5 VDC.
What is the recommended input wire gauge?
For 600W load, use at least 14 AWG for input and output wires to minimize voltage drop.
Does the HEP-600-15 have a remote on/off function?
Yes, it supports remote on/off control via a dry contact between RC+ and RC- terminals. Short to turn on, open to turn off.
What should I do if the fan is not spinning?
Check if the power supply is under load and temperature. The fan is temperature-controlled; it may not spin at low loads. If it never spins under full load, contact support.
How should I mount the power supply?
Mount horizontally on a flat surface using the four screw holes. Ensure at least 10 cm clearance around the fan for proper airflow.
What is the efficiency at 100% load?
The typical efficiency at full load is 93%, reducing heat dissipation.
Can I use this power supply in a humid environment?
The HEP-600-15 has a conformal coating for protection, but it is not waterproof. Avoid condensation; operating humidity is 20-90% RH non-condensing.
User questions about HEP-600-15 Mean Well
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cables for Computers and Peripherals in PDF format for free! Find your manual HEP-600-15 - Mean Well and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HEP-600-15 by Mean Well.
USER MANUAL HEP-600-15 Mean Well
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mean Well
Model : HEP-600-15
Category : Cables for Computers and Peripherals