DS-2CD7133-E - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD7133-E Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Security Camera |
| Model | DS-2CD7133-E |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 3 Megapixels (2048 x 1536) |
| Lens | 2.8mm fixed lens |
| Infrared Range | Up to 20m |
| Video Compression | H.265+ / H.265 / H.264+ / H.264 / MJPEG |
| Power Supply | PoE (802.3af) or 12V DC |
| Power Consumption | Max 5.5W |
| Dimensions | 105mm x 78mm (Diameter x Height) |
| Weight | Approx. 350g |
| Protection Rating | IP66 (Weatherproof) |
| Operating Temperature | -30°C to +60°C |
| Main Functions | Motion detection, tampering alarm, H.265+ compression, IR cut filter, PoE support |
| Storage | MicroSD card slot (up to 128GB), NAS, or NVR |
| Network Interface | 1 RJ45 10M/100M self-adaptive Ethernet port |
| Maintenance & Cleaning | Clean with soft dry cloth; avoid solvents; periodic inspection of lens and IR LEDs |
| Safety & Certifications | CE, FCC, UL |
| Spare Parts & Repairability | Standardized parts; contact Hikvision service for replacement; designed for easy installation |
| General Information | Indoor/Outdoor use, vandal-resistant design, compatible with Hikvision NVRs |
Frequently Asked Questions - DS-2CD7133-E Hikvision
How do I restore the camera to factory default settings?
Press and hold the reset button (inside the camera) for 10 seconds while the camera is powered on. The camera will reboot with factory settings.
Can I use this camera without a PoE switch?
Yes, the camera supports 12V DC power input. Use a compatible 12V power adapter (not included).
What is the maximum resolution supported?
The camera supports up to 3MP (2048x1536) at 20 fps.
How do I access the camera remotely?
Connect the camera to your network, then use the Hikvision app (iVMS-4500 or Hik-Connect) or web browser to access via IP address. Ensure port forwarding is set up on your router.
Does this camera support audio?
No, the DS-2CD7133-E does not have a built-in microphone or speaker. It is a video-only camera.
What type of memory cards are supported?
MicroSD cards up to 128GB (Class 10 or above) are supported. Insert the card into the slot under the camera cover.
Is the camera suitable for outdoor use?
Yes, the camera has an IP66 rating, making it dust-tight and protected against heavy rain. It can operate in temperatures from -30°C to +60°C.
How do I enable motion detection?
Log into the camera web interface, go to Configuration > Events > Basic Event > Motion Detection. Set detection areas and sensitivity, then enable the trigger.
Can I connect this camera to a third-party NVR?
Yes, it supports ONVIF protocol (Profile S), so it can work with many third-party NVRs. Ensure the NVR is ONVIF compatible.
What is the IR range of the camera?
The built-in IR LEDs provide up to 20 meters of night vision in complete darkness.
User questions about DS-2CD7133-E Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD7133-E - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD7133-E by Hikvision.
USER MANUAL DS-2CD7133-E Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-2CD7133-E
Category : Security Camera