ARXF42C5V1B - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free ARXF42C5V1B DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split System Air Conditioner |
| Brand | Daikin |
| Model | ARXF42C5V1B |
| Cooling Capacity | 4.2 kW (14,300 BTU/h) |
| Heating Capacity | 4.5 kW (15,400 BTU/h) |
| Power Supply | 230 V / 50 Hz / Single Phase |
| Refrigerant | R32 |
| Compressor Type | Inverter (Variable Speed) |
| Indoor Unit Dimensions (W x H x D) | 800 x 290 x 200 mm |
| Indoor Unit Weight | 10.0 kg |
| Outdoor Unit Dimensions (W x H x D) | 765 x 550 x 285 mm |
| Outdoor Unit Weight | 35.0 kg |
| Energy Efficiency Ratio (EER) | 3.5 (A++ rated) |
| Airflow Rate (High) | 600 m³/h |
| Noise Level (Indoor, Low/High) | 22 / 42 dB(A) |
| Noise Level (Outdoor) | 48 dB(A) |
| Main Functions | Cooling, Heating, Dehumidification, Fan, Auto Mode, Night Quiet Mode |
| Control Type | Wireless Remote Controller + App (optional) |
| Filter Type | Washable, Antibacterial, Anti-Dust |
| Maintenance & Cleaning | Clean filter every 2 weeks; exterior with damp cloth; avoid water on electrical parts |
| Safety Features | Overload protection, auto restart, timer, child lock (remote) |
| Spare Parts & Repairability | Available through authorized Daikin service centers; remote, filter, motherboard |
| Installation Requirements | Professional installation required; clearance 15 cm around unit |
Frequently Asked Questions - ARXF42C5V1B DAIKIN
How do I clean the air filter on the Daikin ARXF42C5V1B?
Turn off the unit and open the front panel. Remove the filter, rinse it under lukewarm water, let it dry completely, then reinsert. Clean every two weeks for optimal performance.
What does the error code 'E5' mean?
Error code E5 typically indicates a communication fault between indoor and outdoor units. Check wiring connections and restart the system. If persists, contact a Daikin service technician.
Can I install the ARXF42C5V1B myself?
No, professional installation is required due to refrigerant handling, electrical connections, and correct sizing. Improper installation voids warranty and may cause safety hazards.
What is the recommended temperature setting for heating?
For heating, set the thermostat between 20°C and 22°C (68°F - 72°F) for comfort and energy efficiency. Each degree higher increases energy consumption by about 6%.
How do I reset the filter indicator?
After cleaning the filter, press and hold the 'FILTER' button on the remote control for 3 seconds until the indicator light turns off. Refer to the manual for exact steps.
Does this unit come with a warranty?
Yes, Daikin offers a standard 2-year warranty on parts and 5 years on the compressor. Register your product online to activate warranty.
Can I use the air conditioner with solar power?
Yes, the ARXF42C5V1B can run on solar if the inverter system supports grid-tie or off-grid, but use a stable voltage. Consult an electrician for proper setup.
How to pair the remote control?
Point the remote at the indoor unit and press 'ON'. The unit will beep. If not responding, replace batteries (AAA) and try again. No manual pairing needed.
What is the maximum length for refrigerant piping?
The maximum piping length is 15 meters, with a height difference of up to 5 meters. Exceeding these limits reduces performance and may damage the compressor.
How to enable 'Night Quiet Mode'?
Press the 'SLEEP' or 'QUIET' button on the remote. The unit will lower fan speed and adjust temperature gradually for silent operation, ideal for bedrooms.
User questions about ARXF42C5V1B DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual ARXF42C5V1B - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARXF42C5V1B by DAIKIN.