10BVS98 - Uncategorized Daytronic - Free user manual and instructions
Find the device manual for free 10BVS98 Daytronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Signal Conditioner / Data Acquisition Module |
| Model | 10BVS98 |
| Brand | Daytronic |
| Dimensions (approx.) | 10.5 x 6.5 x 2.5 inches (267 x 165 x 64 mm) |
| Weight (approx.) | 3.5 lb (1.6 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, or 12 VDC optional |
| Power Consumption | 15 W typical |
| Display | Front panel LCD with backlight |
| Input Channels | 8 differential voltage inputs |
| Input Range | ±10 V, ±5 V, ±1 V, ±100 mV (selectable) |
| Output Interfaces | RS-232, USB, IEEE-488 (GPIB) optional |
| Sample Rate | Up to 100 kHz per channel |
| Resolution | 16-bit A/D converter |
| Accuracy | ±0.01% of reading ±0.005% of range |
| Filter Type | Programmable low-pass, high-pass, band-pass |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity Range | 10% to 90% non-condensing |
| Mounting | Rack-mountable (2U) or benchtop |
| Safety Compliance | CE, UL, IEC 61010-1 |
| Warranty | 1 year limited |
| Maintenance | Periodic calibration recommended; clean with damp cloth |
| Accessories Included | Power cord, USB cable, software CD, manual |
Frequently Asked Questions - 10BVS98 Daytronic
How do I connect the 10BVS98 to my computer?
Connect the USB or RS-232 cable to the corresponding port on the rear panel. Install the included software driver before connecting.
What is the maximum input voltage?
The maximum safe input voltage is ±30 V for the high range, but normal operating range is up to ±10 V. Exceeding ±30 V may damage the device.
How to calibrate the 10BVS98?
Calibration is performed using internal software or via front panel buttons. Apply known voltage standards and adjust offset/gain. Full procedure is in the manual.
Can I use the 10BVS98 with LabVIEW?
Yes, the device supports LabVIEW via VISA driver. Download the appropriate driver from Daytronic's website.
What is the sample rate per channel?
The maximum sample rate is 100 kHz per channel when using a single channel. With multiple active channels, the total aggregate rate is 100 kHz divided by the number of channels.
How to filter noise on input signals?
Use the built-in programmable filters accessible via software. You can select low-pass, high-pass, or band-pass with adjustable cutoff frequencies.
Does the device have isolated inputs?
Yes, each input channel is galvanically isolated up to 1000 V to prevent ground loops.
What to do if the display shows 'Overload'?
The 'Overload' indication means the input voltage exceeds the selected range. Reduce the input signal or change to a higher voltage range.
How to update firmware?
Download the latest firmware from Daytronic support page. Transfer via USB using the update utility provided with the software.
Where can I find the user manual?
The manual is available for free download on notice-facile.com. You can also request a printed copy from Daytronic.
User questions about 10BVS98 Daytronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 10BVS98 - Daytronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 10BVS98 by Daytronic.
USER MANUAL 10BVS98 Daytronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Daytronic
Model : 10BVS98
Category : Uncategorized