LD-1403W1 - Dishwasher LG - Free user manual and instructions
Find the device manual for free LD-1403W1 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | LG |
| Model | LD-1403W1 |
| Installation Type | Built-under / Integrated |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approximately 50 kg |
| Power Supply | 220-240 V ~ 50 Hz, 10 A |
| Energy Efficiency Class | A+ (typical for era) |
| Number of Place Settings | 14 |
| Noise Level | 44 dB |
| Wash Programs | Eco, Intensive, Normal, Quick, Rinse |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Water Consumption per Cycle | Approximately 9.5 L |
| Energy Consumption per Cycle | 1.02 kWh |
| Spray Arms | 3 (upper, middle, lower) |
| Filter System | Self-cleaning with micro filter |
| Interior Material | Stainless steel |
| Control Panel | Electronic with LED display |
| Safety Features | Flood protection, child lock |
| Spare Parts Availability | Generic and OEM parts available |
| Manual Language | English (PDF) |
Frequently Asked Questions - LD-1403W1 LG
How to start a wash cycle on LG LD-1403W1?
Load dishes, add detergent, select desired program (e.g., Eco or Normal), close door, and press the Start button.
How to clean the filter on LG LD-1403W1?
Remove the lower spray arm, twist the filter assembly counterclockwise, lift out the cylindrical filter, rinse under running water, reassemble, and replace.
What does the child lock feature do?
It prevents unintended button presses by locking the control panel. Activate by pressing and holding the Child Lock button for 3 seconds.
How to cancel a running cycle?
Press and hold the Start/Pause button for 3 seconds to cancel the current cycle. The water will drain and the machine will reset.
Why is the dishwasher not draining?
Check if the drain hose is kinked or clogged. Clean the filter and ensure the sink drain is not blocked. If persists, check the drain pump.
How to use the delay start function?
Press the Delay Start button repeatedly to set the delay time (1-24 hours). Then press Start. The dishwasher will begin after the set delay.
What type of detergent should I use?
Use dishwasher detergent (powder, gel, or tablets). For LG dishwashers, avoid excessive foam. Prefer products with rinse aid.
How to fix error code 'E1'?
Error E1 indicates a water leak. Turn off water supply, unplug the appliance, check hoses and connections, and contact service if needed.
How to adjust the rinse aid setting?
Open the rinse aid dispenser lid, set the dial to 1-4 (higher for more rinsing aid). Typically set to 2 for normal conditions.
How to download the user manual?
Visit the support page, search model LD-1403W1, and download the PDF manual in English. It is also accessible via third-party sites.
User questions about LD-1403W1 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual LD-1403W1 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LD-1403W1 by LG.
USER MANUAL LD-1403W1 LG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LG
Model : LD-1403W1
Category : Dishwasher