Flea3 - Thermal camera FLIR - Free user manual and instructions
Find the device manual for free Flea3 FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Camera |
| Brand | FLIR |
| Model | Flea3 |
| Dimensions (W x H x D) | 4.5 x 2.8 x 1.2 in (115 x 71 x 30 mm) |
| Weight | 0.5 lb (230 g) |
| Power Supply | Rechargeable Li-Ion battery, 3.7V, 2600 mAh |
| Battery Life | Up to 4 hours continuous use |
| Display | 2.8 inch TFT LCD, 320x240 pixels |
| Thermal Resolution | 160 x 120 pixels |
| Temperature Range | -4°F to 752°F (-20°C to 400°C) |
| Accuracy | ±2°C or ±2% of reading |
| Field of View | 35° x 26° |
| Image Modes | Thermal, Visual, MSX, Picture-in-Picture |
| Storage | MicroSD card (up to 32GB) |
| Connectivity | USB 2.0, Micro HDMI |
| Maintenance | Clean lens with soft dry cloth; do not use solvents |
| Safety | Avoid direct eye exposure to laser; use only with supplied charger |
| Spare Parts & Reparability | Battery and charger available as accessories; repairs by authorized service only |
| Included Accessories | Battery, charger, microSD card, USB cable, hard case |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - Flea3 FLIR
How do I turn on the FLIR Flea3 thermal camera?
Press and hold the power button located on the top of the camera for 2 seconds until the display lights up.
How do I calibrate the thermal camera?
The camera automatically calibrates when powered on. For manual calibration, press the 'Cal' button on the side while the lens cap is closed.
What image modes are available?
The Flea3 offers Thermal, Visual, MSX (Multi-Spectral Dynamic Imaging), and Picture-in-Picture modes. Cycle through them using the Mode button.
How do I save an image?
Press the capture button (center of the navigation pad) to save the current image to the microSD card. A confirmation icon will appear.
What type of microSD card is recommended?
Use a Class 10 or UHS-I microSD card up to 32GB. Format the card in the camera before first use.
How do I clean the lens?
Use a soft, lint-free cloth to gently wipe the lens. If needed, slightly dampen the cloth with water. Never use alcohol or other solvents.
How long does the battery last?
The rechargeable battery provides up to 4 hours of continuous operation. Charging time is approximately 2 hours.
Can I use the camera while charging?
Yes, you can operate the camera while connected to the charger via the USB port. However, charging may take longer.
What is the safe storage temperature?
Store the camera in a dry place at temperatures between -10°C and 50°C (14°F to 122°F) to avoid damage.
How do I update the firmware?
Download the latest firmware from the FLIR website. Copy the file to the root of the microSD card, insert it into the camera, and follow the on-screen instructions.
User questions about Flea3 FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermal camera in PDF format for free! Find your manual Flea3 - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flea3 by FLIR.
USER MANUAL Flea3 FLIR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLIR
Model : Flea3
Category : Thermal camera