DTE810 - Uncategorized Emerson - Free user manual and instructions
Find the device manual for free DTE810 Emerson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Temperature Transmitter/Controller |
| Brand | Emerson |
| Model | DTE810 |
| Dimensions | Approx. 100 x 80 x 30 mm |
| Weight | Approx. 200 g |
| Power Supply | 24 V AC/DC |
| Display | LCD numeric display |
| Temperature Range | -40 to 120 °C |
| Accuracy | ±0.5 °C |
| Output Signal | 4-20 mA |
| Sensor Type | Pt100 RTD |
| Protection Class | IP65 (front panel) |
| Mounting | Panel mount |
| Functions | Temperature measurement, alarm, control output |
| Cleaning | Wipe with a dry, soft cloth |
| Safety | Follow electrical safety precautions; disconnect power before cleaning |
| Spare Parts | Contact authorized Emerson service center |
| Reparability | Service by qualified personnel only |
| General Information | Precision instrument for industrial temperature monitoring |
Frequently Asked Questions - DTE810 Emerson
How do I install the Emerson DTE810?
Mount the device on a panel using the provided brackets. Connect the power supply (24 V AC/DC) and the Pt100 sensor. Ensure proper wiring as per the wiring diagram in the manual.
What is the temperature range of the DTE810?
The DTE810 measures temperatures from -40 to 120 °C with an accuracy of ±0.5 °C.
How do I configure the output signal?
The DTE810 outputs a 4-20 mA signal. Scaling and alarm settings can be adjusted via the front panel buttons or through the optional software.
The display shows an error code. What should I do?
Common error codes indicate sensor failure (open/short) or out-of-range measurement. Check the sensor wiring and ensure it is connected properly. If persists, contact support.
Can I use the DTE810 with a different sensor type?
The DTE810 is designed for Pt100 RTD sensors. Using other sensor types may require recalibration or hardware modification. Refer to the manual for compatible sensors.
How do I clean the device?
Disconnect power before cleaning. Wipe the front panel with a dry, soft cloth. Do not use solvents or abrasive cleaners.
What is the power consumption?
The DTE810 consumes less than 2 W at 24 V supply.
Is the device water-resistant?
The front panel is rated IP65, offering protection against dust and water jets. The rear housing is less protected; avoid exposure to moisture.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by selecting your language and email.
How do I get spare parts?
Spare parts can be ordered through authorized Emerson distributors or by contacting the Emerson service center. Provide the model number DTE810 and serial number.
User questions about DTE810 Emerson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DTE810 - Emerson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTE810 by Emerson.
USER MANUAL DTE810 Emerson
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Emerson
Model : DTE810
Category : Uncategorized