PD566 - Loudspeaker JBL - Free user manual and instructions
Find the device manual for free PD566 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Brand | JBL |
| Model | PD566 |
| Dimensions (H x W x D) | 7.1 x 2.8 x 2.8 in (180 x 70 x 70 mm) |
| Weight | 1.1 lb (0.5 kg) |
| Power Source | Rechargeable Li-ion Battery (3.7V, 2000mAh) |
| Charging Time | 2.5 hours |
| Charging Port | USB-C |
| Battery Life | Up to 10 hours (varies by volume) |
| Wireless Range | 33 ft (10 m) |
| Bluetooth Version | 5.0 |
| Audio Output Power | 10W RMS |
| Frequency Response | 70 Hz - 20 kHz |
| Signal-to-Noise Ratio | >80 dB |
| Waterproof Rating | IPX7 (submersible up to 1m for 30 min) |
| Built-in Microphone | Yes (hands-free calling) |
| Voice Assistant Support | Yes (Siri, Google Assistant) |
| Control Buttons | Power, Volume +/-, Play/Pause, Bluetooth, Microphone |
| Included Accessories | USB-C Cable, Quick Start Guide |
| Material | Fabric and rubber housing |
| Usage | Indoor / Outdoor |
Frequently Asked Questions - PD566 JBL
How do I pair my device with the JBL PD566?
Turn on the speaker by pressing the Power button. Press the Bluetooth button once to enter pairing mode. On your device, select "JBL PD566" from the Bluetooth list. A voice prompt will confirm connection.
How do I reset the speaker to factory settings?
Press and hold the Volume + and Bluetooth buttons simultaneously for about 5 seconds until the device powers off and restarts. This clears all paired devices.
What is the battery life of the JBL PD566?
The battery lasts up to 10 hours on a full charge, depending on volume level and audio content.
Is the JBL PD566 waterproof?
Yes, it has an IPX7 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes. However, it is not designed for swimming or saltwater use.
How do I charge the speaker?
Connect the included USB-C cable to the charging port on the back and a 5V power adapter. The LED indicator will glow red during charging and turn off when fully charged (approximately 2.5 hours).
Can I use the speaker while it is charging?
Yes, you can play music while the speaker is plugged in and charging.
How do I answer a phone call using the speaker?
When a call comes in, press the Play/Pause button to answer. To end the call, press the same button again. To reject a call, press and hold the button.
Can I connect two devices at once?
No, the JBL PD566 supports single-point connection only. You must disconnect one device before pairing another.
Why is there no sound coming from the speaker?
Check that the speaker is powered on, the volume is turned up on both the speaker and your device, the Bluetooth connection is active, and the speaker is not muted. Also ensure the source is playing audio.
How do I clean the JBL PD566?
Use a soft, dry or slightly damp cloth to wipe the exterior. Avoid using abrasive cleaners or submerging the speaker in water beyond its IPX7 rating. Make sure the charging port cover is securely closed before cleaning with water.
User questions about PD566 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual PD566 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD566 by JBL.
USER MANUAL PD566 JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : PD566
Category : Loudspeaker