S-U-100PU1R5 - Air Conditioning PANASONIC - Free user manual and instructions
Find the device manual for free S-U-100PU1R5 PANASONIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split System Air Conditioner (Wall-Mounted Indoor Unit) |
| Model | S-U-100PU1R5 |
| Brand | Panasonic |
| Cooling Capacity (BTU/h) | 10,000 |
| Heating Capacity (BTU/h) | 10,000 (Heat Pump Model) |
| Power Supply | 220-240 V, 50 Hz, 1 Phase |
| Indoor Unit Dimensions (W x H x D) | 799 x 287 x 232 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 290 mm |
| Indoor Unit Weight | 9.0 kg |
| Outdoor Unit Weight | 24.0 kg |
| Refrigerant | R32 |
| Energy Efficiency Class (Cooling) | A++ |
| SEER (Seasonal Energy Efficiency Ratio) | 6.5 |
| Noise Level Indoor (Low/High) | 22 / 42 dB(A) |
| Noise Level Outdoor | 48 dB(A) |
| Functions | Cooling, Heating, Dehumidifying, Fan, Auto Mode, Timer, Sleep Mode |
| Airflow Control | 4-Way Auto Louver, Quiet Mode, Powerful Mode |
| Filter | Washable Pre-Filter, Nanoe-G Air Purifying Filter |
| Maintenance | Clean filters every 2 weeks; Professional servicing recommended annually |
| Safety Features | Auto Restart, Overheat Protection, Compressor Protection |
| Remote Control | Infrared, with LCD Display |
| Repairability Index | 8.5 / 10 (Estimated based on typical Panasonic models) |
Frequently Asked Questions - S-U-100PU1R5 PANASONIC
How do I clean the air filters?
Open the front panel, remove the filters, and wash them with mild detergent and water. Let them dry completely before reinstalling. Clean every 2 weeks for optimal performance.
What does error code H11 mean?
Error H11 indicates a communication fault between indoor and outdoor units. Turn off the unit, wait 5 minutes, and restart. If persistent, contact a Panasonic service center.
Can I use the air conditioner in winter?
Yes, this model is a heat pump and provides heating even at low outdoor temperatures, down to -15°C. Use the Heating mode for winter operation.
How do I set the timer?
Press the Timer button on the remote. Use the arrow keys to set the desired on or off time. Confirm by pressing the Timer button again.
What type of refrigerant does this unit use?
This model uses R32 refrigerant, which has lower global warming potential compared to older refrigerants like R410A.
Is professional installation required?
Yes, installation must be performed by a qualified technician to ensure proper refrigerant charging, electrical connections, and drainage. Improper installation may void warranty.
How do I switch between cooling and heating?
Press the Mode button on the remote until the desired mode icon appears: snowflake for cooling, sun for heating, droplet for dehumidifying, fan for fan only.
What should I do if the unit is not cooling?
Check if the filter is clean, ensure the thermostat is set lower than room temperature, and verify that the outdoor unit is not obstructed. If the problem persists, contact service.
Can I use an extension cord?
No, never use an extension cord. The unit requires a dedicated circuit with proper grounding. Using an extension cord can cause fire or electric shock.
How do I reset the remote control?
Remove the batteries, press any button for 3 seconds, then reinstall the batteries. If still not working, replace with new AAA alkaline batteries.
User questions about S-U-100PU1R5 PANASONIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual S-U-100PU1R5 - PANASONIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S-U-100PU1R5 by PANASONIC.
USER MANUAL S-U-100PU1R5 PANASONIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PANASONIC
Model : S-U-100PU1R5
Category : Air Conditioning