DXTC24X426A-20 - Air conditioner Daizuki - Free user manual and instructions
Find the device manual for free DXTC24X426A-20 Daizuki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split System Air Conditioner |
| Brand | Daizuki |
| Model | DXTC24X426A-20 |
| Cooling Capacity | 24,000 BTU/h |
| Heating Capacity | 24,000 BTU/h |
| Power Supply | 208-230V ~ 60Hz, 1 Phase |
| Indoor Unit Dimensions (WxHxD) | 1070 x 290 x 220 mm |
| Outdoor Unit Dimensions (WxHxD) | 870 x 650 x 350 mm |
| Indoor Unit Weight | 14 kg |
| Outdoor Unit Weight | 48 kg |
| Refrigerant Type | R410A |
| Energy Efficiency Ratio (EER) | 10.5 |
| Noise Level (Indoor) | 48 dB(A) |
| Noise Level (Outdoor) | 58 dB(A) |
| Functions | Cooling, Heating, Dehumidification, Fan, Auto Swing |
| Filter Type | Washable Anti-Bacterial Filter |
| Wi-Fi Compatible | Yes (optional adapter) |
| Warranty | 5 Years on Compressor, 1 Year on Parts |
| Installation Type | Professional Installation Required |
Frequently Asked Questions - DXTC24X426A-20 Daizuki
How to clean the air conditioner filter?
Turn off the unit and unplug it. Open the front panel, remove the filter, and wash it with mild detergent and water. Let it dry completely before reinstalling. Clean every 2 weeks for optimal performance.
Why is my air conditioner not cooling?
Check if the filter is dirty, the thermostat is set correctly, and the outdoor unit is not blocked. Also ensure the circuit breaker is on. If problem persists, contact a technician.
What is the recommended temperature setting?
For cooling, set between 24-26°C (75-78°F). For heating, set around 20-22°C (68-72°F) for energy efficiency and comfort.
How do I use the timer function?
Press the TIMER button on the remote. Use the +/- buttons to set the desired time for the unit to turn on or off. Confirm by pressing TIMER again. Refer to the manual for detailed steps.
What does the error code E1 mean?
E1 indicates a malfunction of the indoor fan motor. Turn off the unit, wait 10 minutes, then restart. If the error persists, contact customer support.
Can I install the air conditioner myself?
No, professional installation is required due to electrical and refrigerant handling. Improper installation may void warranty and cause hazards.
How often should I service my air conditioner?
It is recommended to have a professional inspection at least once a year. Clean or replace filters every 2-4 weeks during heavy use.
The remote control is not working. What should I do?
Check if batteries are installed correctly and have charge. Ensure there is no obstruction between remote and unit. If still not working, try resetting the remote by removing batteries for 30 seconds.
What type of refrigerant does this model use?
The Daizuki DXTC24X426A-20 uses R410A refrigerant, which is environmentally friendly and efficient. Always have a certified technician handle refrigerant.
How do I switch between cooling and heating modes?
Press the MODE button on the remote until you see the desired mode icon: snowflake for cooling, sun for heating. The unit will start operating in that mode after a few seconds.
User questions about DXTC24X426A-20 Daizuki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual DXTC24X426A-20 - Daizuki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DXTC24X426A-20 by Daizuki.
USER MANUAL DXTC24X426A-20 Daizuki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Daizuki
Model : DXTC24X426A-20
Category : Air conditioner