Phoenix - Effect pedal Walrus Audio - Free user manual and instructions
Find the device manual for free Phoenix Walrus Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Supply for Guitar Effect Pedals |
| Brand | Walrus Audio |
| Model | Phoenix |
| Dimensions | 6.5 x 3.5 x 1.5 inches (165 x 89 x 38 mm) |
| Weight | 1.2 lbs (544 g) |
| Input Power | 18V DC 2.1mm center positive, 2A |
| Outputs | 8 isolated outputs, 9V DC, 500mA each |
| Output Types | 6 x 9V DC (500mA), 2 x 9V DC (500mA) or 12V DC (250mA) selectable |
| Polarity | Center negative for all outputs (standard for most pedals) |
| Noise Isolation | Fully isolated outputs eliminate ground loop hum |
| Short Circuit Protection | Yes, per output |
| Overload Protection | Yes, thermal and current limiting |
| LED Indicator | Power indicator LED on unit |
| Included Accessories | Mounting bracket, screws, rubber feet, 18V DC adapter, 8 daisy chain cables |
| Compatibility | Works with most 9V and 12V DC guitar pedals |
| Mounting | Can be mounted under pedalboard |
| Construction | Metal chassis for durability |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Safety | Use only included AC adapter; keep away from moisture |
| Repairability | No user-serviceable parts; contact Walrus Audio for service |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - Phoenix Walrus Audio
How many pedals can the Walrus Audio Phoenix power?
The Phoenix has 8 isolated outputs, each providing up to 500mA at 9V DC. It can power up to 8 standard pedals, or fewer if some pedals require more current. Two outputs can be switched to 12V DC (250mA) for higher voltage pedals.
Is the Walrus Audio Phoenix compatible with all guitar pedals?
It works with most pedals that accept 9V DC with center negative polarity. Check your pedal's voltage and polarity. The unit also offers two selectable 12V outputs for pedals requiring 12V.
Does the Phoenix eliminate noise from my pedalboard?
Yes, each output is fully isolated, which prevents ground loop hum and reduces noise. The clean power supply ensures your pedals run quietly.
What is the total current capacity of the Phoenix?
The Phoenix can deliver a total of 4A (4000mA) across its 8 outputs, with each output capable of 500mA. However, the overall input power is 18V DC at 2A, so total power is limited to 36W. You can distribute current as needed, but do not exceed the output limits.
Can I daisy-chain pedals from one output?
Yes, each output can supply up to 500mA, so you can daisy-chain multiple low-current pedals from one output as long as total current draw stays under 500mA. However, this may introduce some noise; isolated outputs are recommended for optimal performance.
How do I mount the Phoenix under my pedalboard?
The unit comes with a mounting bracket and screws. You can attach it to a flat surface under your pedalboard using the included hardware. Ensure it is secure and has adequate ventilation.
What is the input voltage and power adapter requirement?
The Phoenix requires an 18V DC 2.1mm center positive power adapter with a minimum of 2A. The included adapter meets these specifications. Using a different adapter may damage the unit.
Are the Phoenix outputs short-circuit protected?
Yes, each output has short-circuit protection. If a pedal or cable causes a short, the affected output will shut down to prevent damage. Other outputs continue operating normally.
Can I use the Phoenix with international voltages?
The included AC adapter is compatible with 100-240V AC, 50/60 Hz, so it can be used worldwide with the appropriate plug adapter.
How do I clean and maintain the Phoenix?
Unplug the unit and wipe it with a dry cloth. Do not use liquids or solvents. Keep the unit away from moisture and extreme temperatures. There are no user-serviceable parts inside; contact Walrus Audio for repairs.
User questions about Phoenix Walrus Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect pedal in PDF format for free! Find your manual Phoenix - Walrus Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Phoenix by Walrus Audio.
USER MANUAL Phoenix Walrus Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Walrus Audio
Model : Phoenix
Category : Effect pedal