PM 8914 - Multimeter FLUKE - Free user manual and instructions
Find the device manual for free PM 8914 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Fluke |
| Model | PM 8914 |
| Display | 4000-count LCD with backlight |
| DC Voltage Range | 400 mV to 600 V |
| AC Voltage Range | 400 mV to 600 V |
| DC Current Range | 400 µA to 10 A |
| AC Current Range | 400 µA to 10 A |
| Resistance Range | 400 Ω to 40 MΩ |
| Capacitance Range | 4 nF to 100 µF |
| Frequency Range | 10 Hz to 100 kHz |
| Temperature Measurement | -20°C to 1000°C (with thermocouple) |
| Diode Test | Yes |
| Continuity Test | Audible beep < 30 Ω |
| True RMS | Yes |
| Auto Range | Yes |
| Data Hold | Yes |
| Min/Max/Avg | Yes |
| Relative Mode | Yes |
| Dimensions | 180 x 87 x 47 mm |
| Weight | 360 g (with battery) |
| Power Supply | 9V battery (1 x 6LR61) |
| Safety Rating | CAT II 600V, CAT III 300V |
| Accessories Included | Test leads, thermocouple, battery, manual |
| Repairability | Replaceable fuses and battery; service center recommended for internal repairs |
Frequently Asked Questions - PM 8914 FLUKE
How do I measure DC voltage with the Fluke PM 8914?
Turn the rotary switch to V (DC). Connect the test leads: black to COM, red to VΩHz. Touch probes to the circuit. Read the display. Use Auto Range for optimal accuracy.
What type of battery does the PM 8914 use?
The multimeter uses a standard 9V alkaline battery (6LR61). A low battery indicator appears when replacement is needed.
Can I measure AC current with this multimeter?
Yes. Turn the rotary switch to A (AC). Press the AC/DC button if necessary. Select the correct range manually or use auto range. Connect the test leads in series with the load.
How do I test continuity?
Turn the rotary switch to the continuity symbol (diode/Ω). Connect test leads to the circuit. A continuous beep indicates a low resistance path (< 30 Ω).
What is the maximum voltage I can measure?
The maximum DC voltage is 600V and maximum AC voltage is 600V RMS. Exceeding these limits may damage the meter or cause injury.
How do I replace the fuse?
Disconnect test leads and turn off the meter. Open the battery compartment cover. Replace the blown fuse (type: F 630mA H 250V for mA/µA range, F 10A H 600V for A range). Close and secure.
Does the PM 8914 have a backlight?
Yes, the LCD display has a white backlight. Press the LIGHT button to turn it on; it automatically turns off after a few seconds to save battery.
How do I measure temperature?
Connect the included K-type thermocouple to the COM and VΩHz jacks. Turn the rotary switch to TEMP. Read the temperature in °C or °F (press °C/°F button).
What safety precautions should I follow?
Always use the rated CAT II 600V or CAT III 300V category. Never measure voltage above the rating. Use insulated test leads. Inspect the meter and leads before use.
How do I clean the multimeter?
Use a soft, damp cloth with mild detergent. Do not use solvents or abrasive cleaners. Ensure the meter is dry before reuse. Clean the test leads with isopropyl alcohol.
User questions about PM 8914 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual PM 8914 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PM 8914 by FLUKE.
USER MANUAL PM 8914 FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : PM 8914
Category : Multimeter