ACR1000A-CTL-24 - Switch Black Box - Free user manual and instructions
Find the device manual for free ACR1000A-CTL-24 Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Ethernet Switch |
| Model | ACR1000A-CTL-24 |
| Ports | 24 x 10/100/1000 Mbps RJ-45 |
| Form Factor | 19-inch rack-mountable, 1U |
| Dimensions (W x D x H) | 17.3 x 8.3 x 1.7 inches (440 x 210 x 44 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | Internal, 100-240 VAC, 50/60 Hz |
| Power Consumption | 25W (max) |
| Management Features | Web GUI, CLI, SNMP v1/v2c/v3, VLAN, QoS, Link Aggregation |
| Layer 2 Features | 802.1Q VLAN, 802.1p QoS, 802.3ad LACP, STP/RSTP/MSTP |
| Security | Port security, ACL, SSH, SSL, 802.1X |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | Up to 9K bytes |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 10% to 90% non-condensing |
| Cooling | Internal fan, air flow front-to-back |
| LED Indicators | Per port: Link/Activity, Speed; System: Power, Status |
| Package Contents | Switch, power cord, rack-mount kit, quick start guide |
| Certifications | FCC Class A, CE, UL |
| Warranty | Limited lifetime |
Frequently Asked Questions - ACR1000A-CTL-24 Black Box
How do I access the web management interface?
Connect your computer to any port on the switch. Set your computer's IP address to 192.168.0.x (subnet mask 255.255.255.0). Open a web browser and go to 192.168.0.1. The default login is admin with password password.
What is the default IP address of the switch?
The default IP address is 192.168.0.1.
How can I reset the switch to factory defaults?
Locate the Reset button on the front panel. Use a paperclip to press and hold the button for about 10 seconds until all LEDs flash. Release the button; the switch will reboot with factory settings.
Does the switch support VLANs?
Yes, the switch supports 802.1Q VLAN tagging. You can configure up to 256 VLANs via the web interface or CLI.
Can I stack multiple switches?
No, this model does not support physical stacking. However, you can manage multiple switches via SNMP or VLAN trunking.
What is the maximum cable length for Ethernet ports?
The maximum cable length for Cat5e or Cat6 cables is 100 meters (328 feet).
How do I enable PoE on this switch?
This model (ACR1000A-CTL-24) does not support PoE. If you need PoE, consider the ACR1000A-POE-24 model.
What troubleshooting steps if the switch is not powering on?
Check the power cord connection and ensure the outlet is working. Verify the Power LED is lit. If still off, try a different power cord or contact support.
How do I update the firmware?
Download the latest firmware from the Black Box website. Log into the web interface, go to Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Is the switch fanless?
No, the switch has one internal fan for cooling. It is not silent but operates at moderate noise levels.
User questions about ACR1000A-CTL-24 Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ACR1000A-CTL-24 - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACR1000A-CTL-24 by Black Box.
USER MANUAL ACR1000A-CTL-24 Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : ACR1000A-CTL-24
Category : Switch