WQ101 - Portable device Global Water - Free user manual and instructions
Find the device manual for free WQ101 Global Water in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Water Quality Meter |
| Brand | Global Water |
| Model | WQ101 |
| Dimensions | 20 x 10 x 5 cm |
| Weight | 300 g |
| Power Supply | 4 x AA Batteries (not included) |
| Battery Life | Approximately 50 hours of continuous use |
| Measurement Parameters | pH, Conductivity, TDS, Temperature, Turbidity |
| pH Range | 0.00 to 14.00 pH |
| Conductivity Range | 0 to 100.0 mS/cm |
| TDS Range | 0 to 1000 ppm |
| Temperature Range | 0 to 50 °C |
| Display | LCD Backlit Display |
| Waterproof Rating | IP67 |
| Calibration | Automatic or manual calibration with standard solutions |
| Data Logging | Up to 100 readings |
| Connectivity | USB for data transfer |
| Maintenance | Rinse sensor after each use; store in clean, dry place |
| Safety | Do not immerse beyond sensor; avoid dropping |
| Spare Parts / Repairability | Replaceable electrodes and sensors available; professional repair recommended |
Frequently Asked Questions - WQ101 Global Water
How do I calibrate the WQ101 meter?
To calibrate, rinse the sensor with distilled water and immerse it in a standard solution. Press the calibration button and wait for the display to stabilize. The meter supports automatic calibration for pH and conductivity. Use fresh calibration standards monthly.
What batteries does the WQ101 require?
The WQ101 requires 4 AA batteries (alkaline recommended). Battery life is approximately 50 hours of continuous use. When the battery indicator shows low, replace all batteries at once.
Can I measure turbidity with this device?
Yes, the WQ101 includes turbidity measurement capability, typically in NTU (Nephelometric Turbidity Units). Refer to the manual for the proper procedure and sample preparation.
Is the WQ101 waterproof?
Yes, the device has an IP67 waterproof rating, meaning it can be submerged in water up to 1 meter for 30 minutes. However, the sensor cap should be tightly closed before immersion.
How often should I clean the sensor?
Clean the sensor after each use by rinsing with clean water. For stubborn deposits, use a soft brush and mild soap. Avoid abrasive materials that may scratch the sensor.
What is the temperature measurement range?
The WQ101 measures temperature from 0°C to 50°C (32°F to 122°F) with an accuracy of ±0.5°C. The temperature sensor is built into the probe.
How do I transfer data to a computer?
Connect the WQ101 to your computer using the USB cable provided. The device will appear as an external drive. Copy the stored data files, which are in CSV format for easy analysis.
What should I do if the display shows an error?
Common errors include 'CAL ERR' (calibration error) or 'BAT LOW' (low battery). For calibration errors, redo calibration with fresh standards. For other errors, reset the device by removing batteries for 30 seconds.
Can I replace the electrodes myself?
Yes, the electrodes are replaceable. Order compatible electrodes from Global Water. Follow the replacement instructions in the manual to avoid damage. Ensure the device is off and dry before replacement.
Where can I find the user manual?
The user manual is available for free download at notice-facile.com in PDF format. Search for 'WQ101 Global Water manual' or access the manual directly from the device product page.
User questions about WQ101 Global Water
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Portable device in PDF format for free! Find your manual WQ101 - Global Water and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WQ101 by Global Water.