MT 200 C - Welding machine Mag-Torch - Free user manual and instructions
Find the device manual for free MT 200 C Mag-Torch in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Welding Machine |
| Brand | Mag-Torch |
| Model | MT 200 C |
| Welding Process | MIG (GMAW) / Flux-Cored (FCAW) |
| Input Voltage | 230 V, 50/60 Hz, Single Phase |
| Rated Output Current | 200 A at 60% Duty Cycle |
| Duty Cycle | 60% @ 200 A, 100% @ 150 A |
| Wire Feed Speed | Adjustable, 1.5 – 15 m/min |
| Welding Wire Diameter | 0.6 – 1.0 mm (0.023 – 0.040 inch) |
| Dimensions (L x W x H) | 430 x 200 x 350 mm (16.9 x 7.9 x 13.8 in) |
| Weight | 13.6 kg (30 lbs) |
| Cooling System | Fan-Cooled |
| Protection Class | IP21S |
| Insulation Class | F |
| Energy Efficiency | ≥ 85% |
| Maintenance | Clean dust from vents regularly; check gun and cable for wear |
| Safety Features | Thermal overload protection, wire feed jam protection |
| Recommended Accessories | Welding helmet, gloves, gas regulator (for MIG) |
| Spare Parts | Contact Mag-Torch or authorized dealers for replacement nozzles, tips, liners |
| Reparability | Repairable by qualified technician; internal components accessible |
Frequently Asked Questions - MT 200 C Mag-Torch
What type of welding can the MT 200 C perform?
The Mag-Torch MT 200 C is a MIG (GMAW) and flux-cored (FCAW) welding machine. It can weld mild steel, stainless steel, and aluminum with the appropriate settings and shielding gas.
What is the input power requirement for this welder?
The MT 200 C requires a 230 V single-phase power supply at 50/60 Hz. Ensure your electrical outlet is rated for at least 30 A to avoid tripping.
What is the duty cycle of the MT 200 C?
The duty cycle is 60% at 200 A and 100% at 150 A. This means you can weld continuously for 6 minutes at 200 A in a 10-minute cycle before needing a cool-down.
What wire sizes can I use with this machine?
The MT 200 C accepts wire diameters from 0.6 to 1.0 mm (0.023 to 0.040 inches). Common choices are 0.8 mm for general purposes.
Can I weld aluminum with the MT 200 C?
Yes, but you need a spool gun or Teflon liner and 100% argon shielding gas. The machine can handle aluminum up to about 3 mm thickness.
How do I set the wire feed speed and voltage?
Refer to the settings chart inside the wire compartment. Start with a low wire speed and adjust voltage until you hear a steady sizzle sound. A weld bead should be flat and well-penetrated.
What gas is recommended for MIG welding?
For mild steel, use a mix of 75% Argon and 25% CO2 (C25). For stainless steel, use a tri-mix (90% He, 7.5% Ar, 2.5% CO2) or 98% Ar + 2% CO2.
How often should I clean the welding gun?
Clean the gun nozzle and contact tip after each spool of wire or when spatter builds up. Use anti-spatter spray to reduce buildup.
What safety gear do I need?
Always wear a welding helmet with proper shade (10-13), flame-resistant gloves, long-sleeved jacket, and safety glasses. Work in a well-ventilated area.
Where can I find replacement parts?
Contact Mag-Torch customer service or visit their website for authorized distributors. Common parts like contact tips, nozzles, and liners are widely available online.
User questions about MT 200 C Mag-Torch
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Welding machine in PDF format for free! Find your manual MT 200 C - Mag-Torch and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MT 200 C by Mag-Torch.
USER MANUAL MT 200 C Mag-Torch
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mag-Torch
Model : MT 200 C
Category : Welding machine