RAC2V1S - Router SAGEMCOM - Free user manual and instructions
Find the device manual for free RAC2V1S SAGEMCOM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Sagemcom |
| Model | RAC2V1S |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Frequency Bands | 2.4 GHz & 5 GHz |
| Maximum Speed | Up to 300 Mbps (2.4 GHz) + 867 Mbps (5 GHz) |
| WAN Port | 1 x Gigabit Ethernet (10/100/1000) |
| LAN Ports | 4 x Gigabit Ethernet (10/100/1000) |
| Antennas | 4 internal antennas |
| Dimensions (approx.) | 200 x 150 x 50 mm |
| Weight (approx.) | 300 g |
| Power Supply | 12V DC, 1A |
| Security | WPA/WPA2, WEP, SPI Firewall |
| VPN Support | PPTP, L2TP, IPSec pass-through |
| Management | Web-based GUI, WPS button |
| LED Indicators | Power, Internet, WLAN, LAN, WPS |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use liquid cleaners. |
| Spare Parts Availability | Contact Sagemcom support for replacement parts |
Frequently Asked Questions - RAC2V1S SAGEMCOM
How do I set up my Sagemcom RAC2V1S router?
Connect the router to your modem via the WAN port, then power on. Use the default Wi-Fi network name and password printed on the label, or access the web interface at 192.168.1.1 with admin credentials.
What is the default username and password?
The default username is usually admin and the default password is admin or printed on the router label. For security, change it immediately.
How do I reset the router to factory settings?
Locate the reset button on the back of the router. Use a paperclip to press and hold it for about 10 seconds until the power LED flashes. The router will reboot with default settings.
How can I improve Wi-Fi range?
Place the router in a central, elevated location away from obstructions. Avoid interference from other electronics. Consider using a Wi-Fi extender or changing the channel in settings.
What does the WPS button do?
The WPS button allows quick connection to devices that support WPS. Press the button on the router, then press the WPS button on your device within 2 minutes to connect without entering the password.
How do I update the router firmware?
Access the web interface, go to Administration > Firmware Upgrade. If an update is available, follow the prompts. Do not power off during the update.
Why is my internet connection slow?
Check for interference, distance from router, or too many connected devices. Run a speed test. Try restarting the router and modem. Update firmware or adjust Wi-Fi channels.
How do I change the Wi-Fi password?
Log into the router web interface (192.168.1.1), go to Wireless Settings, enter a new password in the WPA pre-shared key field, then save and reboot.
Can I use the router as a range extender?
The RAC2V1S does not support repeater mode natively. However, you can use a second router in bridge mode or purchase a dedicated extender.
Where can I find the manual for this router?
You can download the PDF manual from notice-facile.com or the Sagemcom support website. The manual includes detailed setup and troubleshooting instructions.
User questions about RAC2V1S SAGEMCOM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual RAC2V1S - SAGEMCOM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RAC2V1S by SAGEMCOM.
USER MANUAL RAC2V1S SAGEMCOM
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SAGEMCOM
Model : RAC2V1S
Category : Router