NBN 100 - Uncategorized Leaptel - Free user manual and instructions
Find the device manual for free NBN 100 Leaptel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | NBN Modem Router |
| Brand | Leaptel |
| Model | NBN 100 |
| Dimensions (W x D x H) | 200 mm x 150 mm x 30 mm |
| Weight | 300 g |
| Power Supply | 12V DC, 1A |
| WiFi Standard | 802.11ac (WiFi 5) |
| LAN Ports | 4 x Gigabit Ethernet |
| WAN Port | 1 x Gigabit Ethernet (NBN connection) |
| NBN Technology Compatible | FTTN, FTTC, FTTP, HFC |
| Maximum Speed | 100 Mbps (NBN 100 plan) |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Type | Internal |
| VPN Support | Yes (PPTP, L2TP, OpenVPN) |
| QoS | Yes |
| Firewall | SPI Firewall |
| LED Indicators | Power, Internet, WiFi, LAN |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Place in a well-ventilated area away from heat sources |
| Spare Parts | Power adapter only (if lost, contact Leaptel) |
| Warranty | 12 months |
Frequently Asked Questions - NBN 100 Leaptel
How do I set up my Leaptel NBN 100 modem?
Connect the NBN connection box to the WAN port using an Ethernet cable. Plug in the power adapter and wait for the Internet LED to turn solid green. Connect your devices via WiFi or LAN.
What is the default WiFi SSID and password?
The default SSID is usually 'Leaptel_NBN_100' and the password is printed on the label on the bottom of the device.
How do I reset the modem to factory settings?
Press and hold the reset button (located on the back) for 10 seconds using a paperclip. The device will reboot with default settings.
Can I use the NBN 100 with any NBN technology?
It is compatible with FTTP, FTTN, FTTC and HFC. For fixed wireless or satellite, additional equipment may be required.
How do I access the modem's web interface?
Open a browser and enter 192.168.1.1. The default username and password are both 'admin'.
What should I do if the Internet LED is red?
Check the Ethernet connection to the NBN box and ensure your service is active. Restart the modem and NBN box. If problem persists, contact your ISP.
Does this modem support VoIP?
No, the NBN 100 does not have a phone port. For VoIP, you need an ATA adapter or a separate VoIP phone.
Can I change the WiFi channel?
Yes, log into the web interface, go to Wireless settings and select a different channel to avoid interference.
How do I update the firmware?
Download the latest firmware from Leaptel's website, then upload it via the web interface under Administration > Firmware Upgrade.
Is the NBN 100 compatible with third-party routers?
Yes, you can use it as a standalone modem in bridge mode and connect your own router. Configure bridge mode via the web interface.
User questions about NBN 100 Leaptel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual NBN 100 - Leaptel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NBN 100 by Leaptel.
USER MANUAL NBN 100 Leaptel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Leaptel
Model : NBN 100
Category : Uncategorized