LX2-630-M1 - Sewing machine JUKI - Free user manual and instructions
Find the device manual for free LX2-630-M1 JUKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-needle lockstitch sewing machine |
| Brand | JUKI |
| Model | LX2-630-M1 |
| Max Sewing Speed | 5,000 rpm |
| Stitch Length | 0-5 mm |
| Needle Bar Stroke | 30 mm |
| Presser Foot Lift | Manual: 10 mm, Automatic: 13 mm |
| Thread Trimming | Automatic |
| Lubrication | Automatic |
| Needle Type | DB x 1 (#9-18) |
| Power Supply | 220V, 250W |
| Weight | 39 kg |
| Dimensions (W x D x H) | 660 x 340 x 500 mm |
| Key Functions | Automatic reverse feed, thread wiper, puller roller system (optional) |
| Safety Features | Finger guard, emergency stop button |
| Maintenance | Regular oiling and cleaning of lint |
| Spare Parts & Repairability | Available through JUKI dealers |
Frequently Asked Questions - LX2-630-M1 JUKI
How do I thread the JUKI LX2-630-M1 sewing machine?
Follow the numbered threading path on the machine. Thread the tension discs, take-up lever, and needle bar thread guide. Ensure the presser foot is raised for proper threading.
How do I adjust the stitch length?
Use the stitch length dial on the front of the machine. Turn it to the desired setting between 0 and 5 mm. Fine adjustments can be made while sewing.
Why does the machine skip stitches?
Skipped stitches may occur due to a bent or dull needle, incorrect needle type, improper threading, or incorrect bobbin tension. Replace the needle and rethread the machine.
How often should I oil the machine?
Oil the machine daily if used continuously. Use JUKI approved oil and apply to the hook area and other moving parts as shown in the manual.
What is the maximum sewing speed?
The maximum sewing speed is 5,000 rpm. However, for optimal stitch quality and machine longevity, adjust speed based on fabric type.
How do I clean the machine?
Remove the needle plate and clean lint from the feed dogs and hook area with a brush. Use compressed air for hard-to-reach areas. Avoid using solvents.
How do I replace the needle?
Loosen the needle clamp screw, remove the old needle, and insert a new needle of type DB x 1 (#9-18) with the flat side facing away from you. Tighten the screw securely.
What should I do if the thread breaks frequently?
Check for burrs on the needle plate or hook, ensure the tension is not too high, and verify that the thread is routed correctly. Use quality thread suitable for the machine.
How do I adjust the bobbin tension?
Turn the small screw on the bobbin case clockwise to increase tension, counterclockwise to decrease. The bobbin should feed smoothly when the thread is pulled.
Where can I find spare parts for this model?
Contact authorized JUKI dealers or visit the JUKI website for genuine spare parts. Use only JUKI replacement parts to maintain warranty and performance.
User questions about LX2-630-M1 JUKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual LX2-630-M1 - JUKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX2-630-M1 by JUKI.
USER MANUAL LX2-630-M1 JUKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JUKI
Model : LX2-630-M1
Category : Sewing machine