SLP12/T - Loudspeaker JBL - Free user manual and instructions
Find the device manual for free SLP12/T JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Loudspeaker |
| Brand | JBL |
| Model | SLP12/T |
| Speaker Type | Two-way, full-range |
| Woofer | 12 inch (304.8 mm) |
| Tweeter | 1 inch (25.4 mm) compression driver |
| Frequency Response | 60 Hz - 20 kHz (±3 dB) |
| Sensitivity | 98 dB (1W/1m) |
| Impedance | 8 ohms |
| Power Handling (Continuous) | 250 W |
| Power Handling (Peak) | 600 W |
| Maximum SPL | 123 dB |
| Enclosure Material | Plywood with black textured coating |
| Grille | Perforated steel with acoustic foam |
| Connectors | 2 x Neutrik Speakon NL4 |
| Dimensions (H x W x D) | 600 mm x 380 mm x 350 mm |
| Weight | 18.1 kg (40 lbs) |
| Recommended Amplifier Power | 250 W to 600 W at 8 ohms |
| Mounting Points | 16 x M10 threaded points, pole mount cap |
| Usage | Portable PA, installed sound |
| Cleaning | Wipe with dry cloth; avoid solvents or abrasives |
| Safety | Do not expose to moisture; ensure stable placement |
| Spare Parts Availability | Available through JBL authorized service centers |
| Repairability | Serviceable by qualified technicians only |
Frequently Asked Questions - SLP12/T JBL
What is the impedance of the JBL SLP12/T?
The JBL SLP12/T has an impedance of 8 ohms. This means it can be driven by most standard amplifiers without issues.
What is the power handling capacity of this speaker?
The continuous power handling is 250 W, and peak power handling is 600 W. Always match with an amplifier that provides power within this range at 8 ohms.
Can I use the JBL SLP12/T for outdoor events?
Yes, it can be used outdoors, but it is not weatherproof. Protect it from direct rain or moisture, and store it in a dry place when not in use.
What type of amplifier should I use?
Use an amplifier rated between 250 W and 600 W into 8 ohms per channel. A higher quality amp with headroom is recommended for best performance.
What is the frequency response of the SLP12/T?
The frequency response is 60 Hz - 20 kHz (±3 dB). It covers the full range for vocals and instruments, but for deep bass, a subwoofer may be added.
How do I connect the speaker to an amplifier?
Use Neutrik Speakon NL4 connectors. Connect pin 1+ and 1- from the amplifier to the same pins on the speaker. Ensure proper polarity for best sound.
Is the JBL SLP12/T a subwoofer?
No, it is a full-range two-way speaker with a 12-inch woofer and a compression driver. It reproduces a wide frequency range but is not designed for sub-bass only.
What are the dimensions of the speaker?
Dimensions are approximately 600 mm (H) x 380 mm (W) x 350 mm (D). Allow extra space for connectors and ventilation.
How much does the SLP12/T weigh?
It weighs about 18.1 kg (40 lbs). Use a sturdy stand or mount and ensure it is securely fastened to avoid accidents.
Can I mount it on a tripod speaker stand?
Yes, it has a pole mount cap compatible with standard 35 mm tripod stands. Ensure the stand can support the weight and height is appropriate for the application.
User questions about SLP12/T JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SLP12/T - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SLP12/T by JBL.
USER MANUAL SLP12/T JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : SLP12/T
Category : Loudspeaker