02418A1SB - Clock AcuRite - Free user manual and instructions
Find the device manual for free 02418A1SB AcuRite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Clock |
| Model | 02418A1SB |
| Brand | AcuRite |
| Display Type | LCD |
| Time Format | 12 or 24 hour |
| Atomic Time Sync | Yes, WWVB |
| Daylight Saving Time | Automatic adjustment |
| Time Zones | 7 US time zones selectable |
| Alarm | Single alarm with snooze |
| Snooze Duration | 5 minutes |
| Indoor Temperature | Displayed (°F or °C) |
| Indoor Humidity | Displayed |
| Power Source | 2 AA alkaline batteries (not included) |
| Battery Life | Approximately 12 months |
| Dimensions (LxWxH) | 7.0 x 1.3 x 7.0 inches |
| Weight | 0.5 lbs |
| Mounting | Wall mount or table stand |
| Cleaning | Wipe with a soft, damp cloth. Do not immerse. |
| Spare Parts | Batteries (AA, not included) |
| Repairability | Not user-serviceable; contact manufacturer for issues. |
Frequently Asked Questions - 02418A1SB AcuRite
How do I set the time on my AcuRite 02418A1SB clock?
Press and hold the SET button for 3 seconds. The time zone will flash. Use the UP or DOWN buttons to select your time zone, then press SET again. Continue to set daylight saving time (ON/OFF), time format (12/24), hour, minute, and year. The clock will automatically sync with the atomic signal after setup.
Why is my clock not displaying the correct time?
Ensure the clock is set to the correct time zone and daylight saving time setting. The atomic signal may be weak; try placing the clock near a window facing Colorado (USA). It can take up to 24 hours to sync. You can also manually set the time by pressing and holding SET.
How do I set the alarm?
Press the ALARM button once to view the alarm time. Press and hold ALARM for 3 seconds; the hour will flash. Use UP/DOWN to adjust, press ALARM again to set minutes, then press ALARM to confirm. To activate the alarm, press ALARM until the alarm icon appears.
How do I turn off the snooze feature?
When the alarm sounds, press the SNOOZE button to snooze for 5 minutes. To turn off the alarm completely, press any other button (e.g., SET or ALARM). The alarm will reset for the next day.
What type of batteries does the clock use?
The AcuRite 02418A1SB requires 2 AA alkaline batteries (not included). Do not use rechargeable batteries as they may affect performance.
How do I switch between Fahrenheit and Celsius?
Press the UP or DOWN button while in normal time display to toggle between °F and °C for the temperature reading.
Why is the temperature/humidity display blank?
Check that the batteries are installed correctly and have sufficient charge. Ensure the clock is not exposed to direct sunlight or extreme temperatures. If the problem persists, reset the clock by removing batteries for 10 seconds.
How do I clean the clock?
Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the clock in water. Dry immediately.
Can I mount the clock on a wall?
Yes, there is a keyhole mount on the back. Use a screw (not included) to hang the clock. Alternatively, use the table stand for desk placement.
What is the accuracy of the atomic time?
The atomic time is accurate to within 1 second every 1000 years, synced to the NIST WWVB radio signal. Reception may vary based on location.
User questions about 02418A1SB AcuRite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual 02418A1SB - AcuRite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 02418A1SB by AcuRite.
USER MANUAL 02418A1SB AcuRite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AcuRite
Model : 02418A1SB
Category : Clock