HDC-IRS - Uncategorized Smart-AVI - Free user manual and instructions
Find the device manual for free HDC-IRS Smart-AVI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | HDMI Extender over CAT5e/6 |
| Brand | Smart-AVI |
| Model | HDC-IRS |
| Dimensions (W x D x H) | 3.9 x 2.8 x 1.0 inches (100 x 70 x 25 mm) |
| Weight | 0.44 lb (200 g) |
| Power Supply | 5V DC, 1A via USB or power adapter |
| Input Interface | 1 x HDMI Type A (female) |
| Output Interface | 1 x RJ45 (female) |
| Max Resolution | 1920x1080 @ 60Hz |
| Max Transmission Distance | up to 60 meters (200 ft) via CAT5e/6 |
| Supported Audio | Stereo audio embedded in HDMI |
| HDCP Support | HDCP 1.4 compliant |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 10% to 85% RH (non-condensing) |
| Installation | Plug and play, no software required |
| Maintenance | Keep connectors clean; avoid moisture |
| Safety | Use only with provided power supply; do not expose to liquids |
| Spare Parts / Repairability | No user-serviceable parts; contact Smart-AVI for support |
Frequently Asked Questions - HDC-IRS Smart-AVI
How do I set up the HDC-IRS extender?
Connect the HDMI source to the transmitter unit, then connect the transmitter to the receiver via a CAT5e/6 cable. Finally, connect the receiver to the display using an HDMI cable. Power both units using the provided USB cables.
What is the maximum transmission distance?
The HDC-IRS can extend HDMI signals up to 60 meters (200 feet) when using high-quality CAT6 cable.
Does the HDC-IRS support 4K resolution?
No, this model supports a maximum resolution of 1080p (1920x1080) at 60Hz. For 4K extenders, consider other Smart-AVI models.
Do I need to install drivers or software?
No, the extender is plug and play and does not require any additional software or drivers.
Can I use a CAT5 cable instead of CAT6?
Yes, CAT5e works but the maximum distance may reduce slightly. For best performance, use CAT6 or higher.
What is the power requirement?
Each unit requires 5V DC, 1A power. You can use the included USB to DC cable or an optional power adapter.
Does it support audio?
Yes, stereo audio embedded in the HDMI signal is transmitted. Separate audio outputs are not provided.
Is the HDC-IRS HDCP compliant?
Yes, it supports HDCP 1.4, which is sufficient for most Blu-ray players and streaming devices.
What should I do if there is no picture?
Check all cable connections, ensure both units are powered, and verify that the HDMI source is set to the correct output. Try a different CAT cable or shorter distance.
Where can I find the user manual?
You can download the PDF manual from the product page on notice-facile.com or visit the Smart-AVI support website.
User questions about HDC-IRS Smart-AVI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HDC-IRS - Smart-AVI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDC-IRS by Smart-AVI.
USER MANUAL HDC-IRS Smart-AVI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Smart-AVI
Model : HDC-IRS
Category : Uncategorized