Plus APST-60-16 - Refrigerator Avantco - Free user manual and instructions
Find the device manual for free Plus APST-60-16 Avantco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Reach-In Refrigerator |
| Model Number | Plus APST-60-16 |
| Brand | Avantco |
| Width | 60 inches |
| Depth | 32 inches |
| Height | 35 inches |
| Weight | Approximately 250 lbs |
| Power Supply | 115V / 60Hz, 5.0 Amps |
| Temperature Range | 33°F to 38°F (0.5°C to 3.3°C) |
| Cooling System | Forced air circulation |
| Refrigerant Type | R-404A |
| Number of Doors | 2 solid doors |
| Shelves Included | 4 adjustable wire shelves |
| Interior Material | Stainless steel |
| Exterior Material | Stainless steel front, aluminum sides |
| Interior Lighting | LED lighting |
| Door Lock | Yes, with keys |
| Casters | 4 heavy-duty casters (2 locking) |
| Defrost Type | Automatic (electric) |
| Energy Star Certified | Yes |
| Maintenance | Clean condenser coils quarterly; replace door gasket as needed |
| Warranty | 3-year parts and labor warranty |
Frequently Asked Questions - Plus APST-60-16 Avantco
What is the temperature range of the Avantco Plus APST-60-16?
The Avantco Plus APST-60-16 maintains a temperature range of 33°F to 38°F (0.5°C to 3.3°C).
How do I clean the condenser coils?
Unplug the unit and remove the front louver. Use a soft brush or vacuum to clean the condenser coils. Do not use water. Reassemble after cleaning.
The refrigerator is not cooling properly. What should I check?
Check that the condenser coils are clean, the door is closing properly, the evaporator fan is running, and the temperature control is set correctly. Ensure the unit has proper ventilation.
How do I adjust the temperature?
The temperature control is located inside the unit. Use a screwdriver to turn the dial clockwise for colder, counterclockwise for warmer. Adjust in small increments and allow 24 hours to stabilize.
What type of refrigerant does this model use?
The Avantco Plus APST-60-16 uses R-404A refrigerant.
How often should I replace the door gasket?
Replace the door gasket when it shows signs of wear, cracking, or does not seal properly. Typically every 2-3 years depending on usage.
Can I put the refrigerator on a carpet?
No, do not place the unit on carpet as it can restrict airflow and cause overheating. Place on a hard, level surface.
What does the error code E1 mean?
Error code E1 indicates a temperature sensor failure. Contact a qualified technician for repair.
Are replacement parts available for this model?
Yes, replacement parts such as shelves, gaskets, and thermostats are available through Avantco authorized dealers.
How do I level the refrigerator?
Use a level on the interior floor. Adjust the caster wheels or front legs (if equipped) by turning them clockwise to raise, counterclockwise to lower.
User questions about Plus APST-60-16 Avantco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Refrigerator in PDF format for free! Find your manual Plus APST-60-16 - Avantco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Plus APST-60-16 by Avantco.