HES-60RD - Water heater HITACHI - Free user manual and instructions
Find the device manual for free HES-60RD HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Electric storage water heater |
| Modèle | HES-60RD |
| Marque | Hitachi |
| Capacité | 60 liters |
| Dimensions (H x L x P) | 800 x 400 x 400 mm |
| Poids net | 20 kg |
| Alimentation électrique | 220-240 V, 50/60 Hz |
| Puissance nominale | 1500 W |
| Classe énergétique | A |
| Température réglable | 30°C - 75°C |
| Matériau du réservoir | Acier émaillé |
| Isolation | Mousse de polyuréthane |
| Protection contre la corrosion | Anode en magnésium |
| Soupape de sécurité | Soupape de pression et de température |
| Protection antigel | Oui |
| Type d'installation | Verticale, murale |
| Raccordement eau | 3/4" BSP |
| Niveau sonore | < 25 dB(A) |
| Pression maximale de service | 0.8 MPa (8 bar) |
| Entretien | Vidange et remplacement de l'anode tous les 2 ans |
| Garantie constructeur | 2 ans pièces et main-d'œuvre |
Frequently Asked Questions - HES-60RD HITACHI
How do I set the temperature on my HITACHI HES-60RD water heater?
Use the thermostat dial located on the front panel. Turn it to your desired temperature, typically between 30°C and 75°C. Wait for the heater to reach the set point.
How often should I perform maintenance on the HES-60RD?
It is recommended to drain and flush the tank annually to remove sediment. Replace the magnesium anode every 2 years to prevent corrosion.
What safety features does the HES-60RD have?
The water heater includes a temperature and pressure relief valve, overheat protection, and an anti-freeze function to prevent damage in cold conditions.
How can I reduce my energy consumption with the HES-60RD?
Set the thermostat to 55°C-60°C for optimal efficiency. Insulate hot water pipes and use a timer to heat water only when needed.
What should I do if water is leaking from the pressure relief valve?
A small drip during heating is normal. If continuous, the valve may be faulty or water pressure too high. Contact a professional to replace the valve or install a pressure reducer.
Can the HES-60RD be installed outdoors?
This model is designed for indoor installation only. Exposure to rain or freezing temperatures may damage the unit and void warranty.
How do I know if the water heater is operating properly?
Check the indicator light on the thermostat. When heating, the light is on. If no hot water after several minutes, ensure power is supplied and the thermostat is set correctly.
What is the capacity of the HES-60RD?
The HES-60RD has a 60-liter capacity, suitable for 2-3 people for daily use.
How do I drain the HITACHI HES-60RD?
Turn off power and water supply. Attach a hose to the drain valve at the bottom. Open the valve and a hot water tap to allow air in. Drain completely.
What type of warranty does the HES-60RD have?
Hitachi offers a standard 2-year warranty covering parts and labor. Register your product online to extend coverage if available.
User questions about HES-60RD HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual HES-60RD - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HES-60RD by HITACHI.
USER MANUAL HES-60RD HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : HES-60RD
Category : Water heater