HC48WS4 - Wine cellar Perlick - Free user manual and instructions
Find the device manual for free HC48WS4 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-In Wine Cellar |
| Model Number | HC48WS4 |
| Brand | Perlick |
| Total Capacity | Approximately 150 bottles (standard 750ml) |
| Zones | Dual zone (upper and lower independently controlled) |
| Temperature Range | Upper zone: 38°F - 50°F; Lower zone: 50°F - 65°F |
| Dimensions (W x H x D) | 48" x 84" x 24" |
| Weight | Approximately 280 lbs |
| Power Supply | 115V, 60Hz, 15A dedicated circuit recommended |
| Cooling System | Compressor-based with forced air circulation |
| Display | Digital touchscreen with temperature readout |
| Shelving | 12 slide-out stainless steel shelves with wooden fronts |
| Door Lock | Keyed lock for security |
| Interior Lighting | LED lighting with on/off switch |
| Ventilation | Front-venting for built-in installation |
| Energy Consumption | Approximately 4.5 kWh/day |
| Noise Level | Less than 40 dB |
| Installation Type | Built-in or freestanding (front-venting) |
| Warranty | 2 years parts and labor, 5 years sealed system |
| Cleaning | Clean interior with mild soap and water; vacuum condenser coils every 6 months |
| Replacement Parts | Available through Perlick authorized dealers (e.g., shelves, door gasket, thermostat) |
| Safety Features | Leveling legs, door alarm, temperature alarm |
Frequently Asked Questions - HC48WS4 Perlick
What is the ideal temperature for storing red wine in the HC48WS4?
The lower zone can be set between 50°F and 65°F, ideal for red wines. The upper zone is for whites (38°F-50°F). Use the digital touchscreen to adjust.
How many bottles does the Perlick HC48WS4 hold?
It holds approximately 150 standard 750ml bottles. Use slide-out shelves for easy access.
Can the HC48WS4 be built under a counter?
Yes, it is front-venting and designed for built-in installation. Ensure proper ventilation clearance as per the manual.
How do I change the temperature in each zone?
Press the Zone button to select upper or lower, then use + or - to adjust. Confirm by pressing the button again.
What should I do if the wine cellar is not cooling properly?
Check that the condenser coils are clean, door is fully closed, and ventilation is not blocked.
If issue persists, contact Perlick support.
If issue persists, contact Perlick support.
Is the interior light always on?
No, the LED light can be turned on or off via a switch inside the unit to prevent heat buildup.
How often should I clean the condenser?
Clean the condenser coils every 6 months using a vacuum cleaner with a brush attachment to maintain efficiency.
Can I install the HC48WS4 outdoors?
No, it is designed for indoor use only in a climate-controlled environment. Outdoor use may void warranty.
What does the alarm indicator mean?
The temperature alarm sounds if the internal temperature exceeds the set range for an extended period. Check door seal and adjust settings.
Where can I buy replacement shelves?
Contact Perlick authorized dealers or visit the Perlick website. Use model HC48WS4 when ordering.
User questions about HC48WS4 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wine cellar in PDF format for free! Find your manual HC48WS4 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC48WS4 by Perlick.